The new permier series cables are of the highest quality. impedance balanced lines are used to reduce noise. Balanced cables have a Shield to provide additional resistance to interference. It prevents ground loop issues. Their tradition is to bring the highest quality cables at the best prices. These cables are made with heavy gauge wires and gold plated connections.
👤I feel cheated by Monoprice. I bought these cables from Monoprice because of their reputation, but they are not any better than cheap Chinese cables. The cables are marked 16ga but are actually 24ga. When assembled with fake wiring, the heavy duty and well made connectors are worthless. Why are you still selling fake cables a year later? I rebuilt the 3 cables with real rated wire and won't ask for a refund. Anyone who trusts Monoprice after this will fall for a company that has no problem with fake products.
👤It needs to be gender neutral. My wife was upset when she saw the package because she assumed there was only two genders. If you had gender neutral packaging in gender neutral descriptions, the problems with the misgendering caused in my marriage could have been avoided.
👤I agree with the other reviewers that Monoprice is not telling the whole truth when it comes to representing 16ga awg wire. They are in a thick rubber sheath. Junk. They went back to Amazon.
👤I bought a pair of Stage Right cables a few years ago as backups and finally needed them. One of the cables has an issue that happens right out of the sealed packaging. There is a lifetime warranty picture CLEAR. The cables are on the product page. I need to contact Monoprice directly since it's their warranty since Amazon won't honor it over chat. Monoprice won't honor it because it was fulfilled by Amazon and I need to contact Amazon for a warranty replacement. I reach back out to Amazon and get the same answer. I'm overreacting now that there's a negative review on their product and I missed a point of contact. Yes, sure. The buyer will give up on trying to get a company to follow through on warranty claims and shift the blame to them because they can't find a specific email contact for Monoprice purchases. There is no plausible deniability for Monoprice when they are called out. Absolutely not.
👤The first thing that comes to your mind is expensive. When you purchase something that works and works well, these are reasonably priced. These are far larger and superior wire than most cables out there, and some buyer's complain that they are not 16 gage, that's right, these are far larger and superior wire than most cables out there, and some buyer's complain that they are not 16 gage You don't need 10 gage wire on an XLR cable for Christ's sake,nor is it to be used as a towing cable. You could look long and hard for other cables that won't work as well as these. Different cables for different applications. I recommend these because they are made from quality materials. This review doesn't condone false or misleading product information.
👤I didn't cut my wire open or anything, my mic is just low, no matter if I get close and I can hear myself in the speakers and headphones, they record low on audacity and my livestreams. I needed a short cord quickly. I got 2 out of 3. I went and bought a mic that was more powerful than my condenser mic and I was able to hear phantom power and gains. I don't ask for refunds because I can't go through the hassle of shipping it back, it's a trap.
Musicians can use a high quality XLR CABLE to hook up a microphone or other musical equipment to a jack input or output. Coluber cable reduces outside noise interference for crisp, clear, balanced voice and superior signal quality over both short and long distances. Quality design features include Twin Conductive PVC Inner Shields, 98% Braided Shield, Noise-Reducing Yarn Wrap, and Gold Plated Contact Points. TheLESS PRO APPLICATIONS is a variety of audio setup, it has a dependable choice for live stage performance, studio recording, school and church PA systems. Double Sided Input and Output are Joined by a Highly Durable Colored Cable in Black, White or Vibrant Color for Easy Identification, and you can choose your length and Connector styles.
👤While recording a short instructional video for my students about the audio used in the school's makeshift green screen studio, I needed a couple of XLR jumper cables that would bring variation and color to the cutaway about the connections between the microphone receiver, processor, and mixer. The school's color was simpatico with orange. I have used various brands of cables, but in my shopping for something I needed within two days, I found these 1.5' Coluber cables. If there is a need for color cables, I will always look for Coluber cable first on Amazon. The two cables have been in daily service for two weeks. They aren't in a position to abuse a longer cable or constant connection handling. They were well priced, looked good, and arrived quickly. These cables met my needs.
👤This cable was used for a speaker that has been around for a decade. The cable that connects to the mic was 20 feet long. I want to replace the original cable once it stops working from the scratches on the cement and wooden patios. The brand arrives in a transparent bag which is low waste and can be recycled. The cable is 50 feet long. The housing is bright and can be seen to avoid trip hazard. The connections are firm and hard to separate.
👤The locking mechanism on one end of the cable is not very secure. If you are recording at home and not moving the equipment, it will probably be fine, but if someone steps on your cord or pulls it, the wire will be disconnected.
👤The ends of the cables can be opened up and re-used if necessary, which is an extra bonus.
👤The cable was very sturdy and felt like it could take a beating. The ends of the cable are made of metal, which makes them strong, but not so thick that it loses its bendability. I did not hear any hissing or crackling after I heard the sound I got. A cable at a reasonable price is a solid option. I will buy it again.
👤I ordered this to be used on my AT2020. I had a spare Mogami. It was a 25' cable. I ordered this in 5' because I wanted something shorter. I haven't noticed a difference between Mogami and this. No hiss, crackles, noise, nothing. I'd recommend this, but I'm not sure how it will hold up with use.
👤Very high quality. I've tried a lot of different cables and none seem to have the same sonic quality. The combination of the Audio Technica AT875R mic and the user is amazing. Highly recommended!
👤The cable is short if you need it. It was as advertised. I needed it for my camera rig. I was surprised by how high quality it is. This boi is male. I don't think it will fall apart soon.
👤I was hesitant about ordering this cable because of the bad reviews, but I was reassured when I found out it had no shielding issues in my bedroom studio. I found a cable that worked perfectly and had no noise problems. It's a good cable for me so far, but I can't speak to their quality assurance.
The microphone cable can be used to connect a high quality microphone to a mixer or guitar amplifier. A high strength aluminum alloy die-cast housing, Gold plated connections, and Oxygen-free copper core deliver pristine sound. The jack plug is a high quality metal type with shielding and anti stress spring, but it cannot fit for phone and couputer. The multi-layers of shielding minimize signal interference and ensure the transmission stable. The cable is compatible with the microphone.
👤We're really sad that our mic stopped working. I went to Amazon to find what I was looking for. The cord had good reviews. Our mics are about 8 years old. I was a little skeptical, but it worked out perfectly. It was a good fit. It's even better than the other cord. I got the 15 foot cord but haven't measured it. Now we can see karaoke together, we were very happy with our purchase.
👤I use this for my acoustic bass guitar which has a PA type plug, but I also use it for my bass amplifier. This was very cheap and well made, so it was perfect. I can't rate the sound quality because of an issue with the guitar's electronics. I might update this after I fix it.
👤These worked well but were too short so I ordered a longer one. The sound is great and the price is great. Highly recommend.
👤These are good products. I just received them and can't review them. The sound is good. They are being used for microphones. I am very happy. Would recommend.
👤The microphone cable works great in the karaoke machine I use it with. The packaging was of high quality. I would recommend a friend to purchase from me again.
👤I needed a patch cord for a mic. This one is built to protect it from the elements. It works for me and was delivered quickly.
👤It works as expected. My dog chewed up our last one and this worked perfectly. You can use this to connect a microphone to our karaoke machine.
👤I had a cord until my gig last night. I had to cancel my gig because the sleeve broke into several pieces inside my keyboard. All of my cords are not made in pieces as this one is and I highly suggest you purchase something else. I have broken parts that need to be repaired.
👤It's a good value and fills the bill admirably.
👤Does the job and is sturdy.
👤It was a bit of wire. I wouldn't recommend it for anyone that uses a DJ sound system, it looks flimsy. It is more ideal for a studio or something like that.
👤It works with sm57, but it would be better if the volume was higher.
👤Didn't use it because it was too big. If I can't use it, size doesn't matter.
High quality noise free performance. Adapt a deafness sign. The balanced signal can be easily adjusted from XLR to 14” TRS or vice versa. It's a great way to plug microphone cables into the digital audio workstations. Low noise, max power. The compact 14” male balanced to XLR female adapter uses the highest quality conductors and components to provide convenience, maximum power and clean signal transfer. D'Addario accessories cables use exclusive In-out Technology for the longest life possible. There are D'ADDARIO accessories. For over 20 years, D' Addario has been leading the industry in innovative and problem-solving products that serve musicians. There are D'ADDARIO accessories. For over 20 years, D' Addario has been leading the industry in innovative and problem-solving products that serve musicians.
👤The price is good but not good for sound quality. I ordered this based on price. The sound level was raised when you bought a different brand.
👤I bought this to plug my mic into a mic cable, but it didn't work out because I didn't have a level out of the mic. I thought the problem was with the amplifier, but I tested it with a different input and it was fine. I know how to use the mic and cable. It must be an accessory. Very disappointed.
👤I used to have a similar product that I used to connect a standard microphone with a mic stand to an amplifier. That was much more expensive than this one. It's small, but it's well-built and should last a long time.
👤I don't like the electronics part of a music system. I was going to a place to play and they had a head with a plug in. My mics have a plug in. The adapter worked. The adapter seemed sturdy and everything fit. I only used them once. The mics were not loud. This may be the type of mic I own.
👤If you are working in a venue with its own amplifier, you need to have a device that fits on my cables, because you never know what connection types they will have. A few of them in your bag will solve the problem. It's a great value and it's a solid adaptor.
👤I ordered the wrong one, but the support was outstanding.
👤It works great. I needed a few of these when I was going between my two homes. The smaller version became much more usable for my situation, even though the larger version had multiple outs. For me, they are great.
👤It looked nice, but didn't work with my microphone. I wonder if it is compatible with my microphone.
👤Good quality long cables tend to take up a lot of storage space and cost a lot of money, so it would be helpful to have every cable we are likely to use. Sometimes we don't have the right cable with us and a box full of adapters can save the day. I needed a long stereo cable terminated at one end by a trs jack but with only a balanced cable available, this Planet Waves adapter sorted the other end for me. A happy performer with a problem solved in minutes.
👤This is not usable when used with any other jack plug. Don't. Buy a dedicated cable.
👤It works with the planet waves audio cable. Very nice.
👤It makes a difference to the tone. You can feel that one of these won't break down when you hook it up to other cables.
A nitrogen-assisted soldering process unique to them, exceeding industry standards, improves integrity of solder joints over traditional methods. This is a custom built cable assembly. The cable is made using the Mogami 2534 wire. If you can't find the length or type of cable you are looking for, please contact them, they will try to assemble the required cable for you. Mogami is one of the most sought after Pro cable brands and is preferred by major recording studios and leading sound engineers around the world. Mogami cables are made in Japan using the best materials and technological expertise of decades of R&D. Neutrik AG-Liechtenstein is the world's leading brand for professional audio connections. The XX series features Gold plated contacts and comes in a black metal housing. Neutrik AG-Liechtenstein is the world's leading brand for professional audio connections. The XX series features Gold plated contacts and comes in a black metal housing. A nitrogen-assisted soldering process unique to them, exceeding industry standards, improves integrity of solder joints over traditional methods.
👤I'm not an audio engineer, I'm a voice over guy. I'm not an audio expert. There is a I hired an audio engineer to check out my setup. This is part of the setup. The audio engineer I worked with recommended it to me. I used to use the xlr cable that came with another product, but I can tell you that this cable is more sturdy and higher quality than what I used to use. I highly recommend.
👤This cable was used to connect my SM7B to my Cloudlifter and to the Presonus studio. On occasion, I would get a little bit of hum as I have led lights and other wireless gear nearby. I thought it was time to step up to a nicer cable, since adjusting the cable a bit would clear it up. The sound quality seems to have increased, and there is no noise anymore. I will buy more of these when I need them.
👤Don't waste your life messing with cheap leads. Good shielding, work well. In a different league from cheap leads. Save yourself time and effort by getting the problems caused by leads.
👤Great quality, but should have been a longer one.
👤It seems to work well. It is being used with my blue baby bottle.
👤I own quite a few Mogami cables and I'm surprised I've never heard of the World Boxing Council. These are almost identical to the Mogamis. There are quality cables.
👤It seems to work as it should. I am happy with it.
Balanced audio cables use impedance balanced lines to reduce noise and increase range, and they are connected to a plug ring. There are 6 different colors of heavy duty flexible rubber jacket. The cable is balanced. High grade copper conductors. The rubber booty strain relief. High quality noise free performance.
👤I need to add new mic cords to the supplies I already have. I wanted to see how well the 25' variety would work for us. I tried to match the cables by buying colored windscreens. Marking mixer numbers with corresponding numbers has made it easier to tell which mic an individual is using. The purple was the only color I wanted to be more defined in. It can be difficult to determine from the back of the sanctuary if it is blue or not. They make a huge improvement in identifying which mic is being used.
👤I've been into audio for a long time. I have expensive mic cables that I use for my best mics. Is there a difference between my best cables and these cables? Not really. The differences between mics, preamplifiers, the room, mic placement, the recorded source, and the other things that become part of the signal path are so insignificant that the cable is the least of your worries. Good cables with good connections are what you need. There are some really bad cables out there. These are truly very good. The cable, jacket and connectors are of good quality. They are hand soldered from cable to cable. The colored cables are great for keeping track of what. I take care of them, but I maintain my equipment well, and they would hold up well in the field, as well as any other pro cable. I have cables that cost as much as 6 of these. I get a good feeling when I use them with my best stuff. All my cables would be high end if I had a million dollars. Just because I could. I don't think there's an audible difference. I was hesitant when I first purchased these cables. These are a great value. I would recommend them for any pro, constant-duty application.
👤I bought a dozen of these 25' XLR cables. They all worked perfectly in two different setups after testing out the box. The second setup required the use of 100 XLRs in different lengths and brands and held up, as well as my more expensive one. It was helpful to have the multi-color XLR when I lost track of a few channels. The lock in of the connectors is solid. The rubber insulation is flexible and strong.
👤When some band members have no clue how to run cables, set up time is always a bit too long for anyone that plays in a live band. The colors on the cables make it easy to trace down mics. I wanted to stay with the brand because the GLS cable worked so well that I bought another one. The cables are soft. This is important when using a "flip" technique or a "over-under" method of coiling cables. These are the best ways to coil cables and the best way to coil the GLS cables. They are perfect when everything is being put away. Oh yes. I'm sold on these.
👤I love these cables! I have a bunch of black cables, each with a number on it, that I use in my home recording studio. I have a bad memory, which means when I come back a couple days later, I can't remember if the kick drum in channel 2 and the snare in channel 3 are the same. All I have to do is look at the cable and find out. There is no need to pull mics away from the drum. It is very convenient. When I bring these cables to a gig, they get thrown into the big bag with all the other mic cables. All of the others are black, so there's no question which ones are mine. I'm not a professional sound engineer, but the cables and connectors themselves seem to be of very good quality, and I've noticed no noise or artifacts when using them. I've been using them for about a year, and they've held up to everything I've said so far.
The Tisino Balanced 1/4 to XLR Male Cable is designed to convert a balanced input to a balanced output. Speaker leads are used to carry the audio signal from the mixer to the speaker. There are three pins connected to the plug ring, one is connected to the plug sleeve, one is connected to the plug tip and the other is connected to the plug ring. The Male XLR to 1/2 cable uses 20 AWG 4N oxygen-free copper to ensure high fidelity sound quality and maximum conductivity. It's a great choice for people who love music. It could eliminate signal loss and static noise, improve the signal transmission, and the copper shell blocks interference which prevents the loss of sound quality. The outer diameter of the cable is 6.0mm, which is top quality and made by environment-friendly material. The patch cable is easy to coil at the end of your gig, despite the multiple layers of shielding and insulation put in place for maximum noise isolation. It has a re-usable strap to keep it organized when not in use.
👤I'm a big fan of high-end stereo. I got tired of paying high prices for BS, cables and balanced XLR. My friend who is a professional sound man turned me on to these! Excellent sound quality and solid build quality can be found. I put a pair of these in between my streaming player and my Cavalli hybrid tube headphones and I couldn't believe the sound of my Hifiman v2's! They were subtle changes but definitely not noticeable. I think that's high praise from a Hifi snob like me and the kicker, all of $35 a pair. Is that really true? I hope the review was helpful.
👤They work. I was not sure about buying cables on Amazon. This was a good product. I used the Phantom power supply and the NT1 mic. It's nice and small. They don't make a mess at my desk. Seem to be well made. There were no complaints.
👤I installed a bunch of these in my church. I have to buy 3-4 more 2 packs with all the change orders and they are fantastic. The spring strain relif makes the cables look nice and uniform. will buy these for future projects.
👤I got these from my PreSonus interface and plugged them in. I was using instrument cables to get the monitors to make sound, but I was getting a horrible interference sound when I turned them on. I don't hear electrical interference after I ordered these balanced cables. I'm glad I got these.
👤I find myself put off by the negative reviews on Amazon. You are close to buying an item that has 4.5 stars, but you see one-star reviews that make it sound terrible. You skip the purchase if you're not sure if it's a scam. I bought this item and it worked for me without a hitch, that's what my review says. There is a I'm trying to make up for low reviews that didn't reflect my experience if I've left this. I might give a more in-depth review with photos later.
👤They sound great when plugged into my M-Audio Pro Duo monitors. I don't know if the guard that keeps the cable from bending from the connection is supposed to move or spin. If they don't, they aren't moving anywhere after they've been plugged in, so they're good to go!
👤I was looking for a pair of male cables to connect to my HD 400. These cables solved buzz issues for me. My setup has a lot of nooks and crannies and I believe the construction of the cables will not wear over time.
👤It feels like plastic and the case is loose. I'm not sure how these will hold up over time.
👤The male and female XLRs were replaced with the male and femaleRCA to go between the studio monitors and sound controller. The price was good for 20 quid. They are hard to damage and look heavy duty. The sound is deeper.
👤I needed to put music in my sound desk from my phone. I lost a few milliseconds of audio input every twenty seconds. I had to use a wireless connection. Rhode products are used by me.
High quality noise free performance. Engineers and artists trust Mogami GOLD STUDIO XLR Microphone Cables for their professional results. Mogami GOLD STUDIO XLR Microphone Cables help to cure many of the problems encountered in a typical project or home studio by providing an enhanced dynamic range with a pin-drop quiet recording environment. Mogami Gold STUDIO XLR mic cables are wired with Mogami Neglex Quad High Definition microphone cable, which has the highest cancellation of noise and RF interference. Mogami's quad cable design is renowned for vastly improving the rejection of noise to the tune of a 95% quieter background as compared to the best 2-conductor microphone cable. Use Mogami GOLD STUDIO XLR Cables for pro audio sound with nearly any device that has an industry-standard XLR 3-pin input or output. There are a lot of common uses for mixers, preamplifiers, amplifier, audio interface, loudspeakers, powered speakers, studio monitors, and more. Excellent for use with amplification, percussion, and vocalist mics. The 6 foot length of the Mogami GOLD STUDIO-06 XLR Microphone Cable is used. The Mogami GOLD STUDIO XLR Microphone Cable series is available in 2, 3, 10, 15, 25, 50, 75, and 100 foot lengths. Mogami's Lifetime "No Excuses" Warranty is included in all brand new Mogami cables and is proudly supported by Mogami and their dedicated network of authorized dealers. Mogami Cable's Lifetime "No Excuses" Warranty specification can be found here.
👤I thought this was a great microphone cable for my voice over studio, until I was turned on. Canare cables have Neutrik connections. This Mogami Gold proves that if you think microhpone cables don't matter in an environment where your voice is the only sound, you are wrong. I immediately got more gain from my microphone with the Mogami, and it quieted down the RF problem I was having as well, which I solved with a different cable along my signal chain. I bought a Canare Quad Core/Neutrik cable from a vendor who has nothing to do with blue jeans. It was about $8 less than the Gold after all was said and done. This is the best way to describe it, it's more musical. I would have been more pleased with the Mogami Gold if I had not learned about Canare. Value for money is in the middle at 3 stars. It made a big difference in sound, it's well built, and feels like it can take a beating, so it's an overall rating of 4. Many large touring sound companies use miles of Mogami cable. I think the Mogami would be more durable in a live application than the Canare. You'll be happy with the money you spent. If you're a voice actor, you need to buy pro-level cabling like this. It is. Matters.
👤If you're using a great mic, you need great cables to match. I use the SM7B mic with the Fethead and the Go-XLR and I used to use the $8 Amazon Essentials cables, but they are not as good. I have a mic behind my computer. I was getting a buzzing inside my mic, everyone on my stream said it sounded terrible, and it did! I asked my friend what he uses for his Shure SM7B and he said he used the Gold Mogami Cables. The rest is history because I bought them. The sound is crisp and nice, the buzzing is gone, and I didn't realize having nice XLR cables would make such a huge difference for sound quality but it really helps! I am not an audio expert. I stream every single day. I'm a full time streamer on Amazon Live. If you have any questions about my mic and cables, you can ask them on my Amazon stream. You can find my streams on Amazon. Clicking on my name will take me to my Amazon profile. You can hear the quality live if I use this mic. I have an idea list on my Amazon profile for setting up a Shure SM7B. I hope this review was helpful and I hope you have an amazing day and that your audio sounds like a homemade apple pie. I would like to thank you for reading my review. :D
👤I've chosen every component of my audio chain as a career voice actor. I don't spend hard-earned funds on gear that I haven't tested or researched. I began to detect a hum in my tracks a while back. The studio is powered by a 2kw isolation transformer and every Chassis is tied to a common copper rod. The problem persisted even after I checked all my connections and made sure there were no AC power cables next to the signal cable. I replaced the XLR cable from the mic's power supply to the wall of my voice booth with Mogami Studio Cables, and then I replaced the same cable from the booth to the AD/DA converter. Voila! Problem solved. Mogami Studio Cable is more shielding from both AC hum and RF interference than any other cable. Mogami Studio Cable isn't meant to be laid out repeatedly and then rolled back up, it's meant to be a bit more stiff. It's supposed to be on the floor. It's a bit more expensive than other cable, but if you're serious about audio, it's worth the extra cost.
This is a custom built cable assembly. The cable assembly is made using the Mogami 2549 wire. If you can't find the length or type of cable you are looking for, please contact them, they will try to assemble the required cable for you. Mogami is one of the most sought after Pro cable brands and is preferred by major recording studios and leading sound engineers around the world. Mogami cables are made in Japan using the best materials and technological expertise of decades of R&D. Neutrik AG-Liechtenstein is the world's leading brand for professional audio connections. The XX series features Gold plated contacts and comes in a black metal housing. Neutrik AG-Liechtenstein is the world's leading brand for professional audio connections. The XX series features Gold plated contacts and comes in a black metal housing. A nitrogen-assisted soldering process unique to them, exceeding industry standards, improves integrity of solder joints over traditional methods.
👤The higher frequencies and air that is missing with my canare l-4e6s cables is what this quality cable sounds like. The canare l-4e6s sounds great, but it's not as good as the Mogami 2549, which is a bit louder. The Mogami 2549 cable connects my microphone to my audio interface. It is hard to notice the difference between these cables. I did not hear any more noise with this cable. The world's best cable has great value and great customer service. I buy most of my cables from them.
👤Excellent value for the money cable. They are almost the same as my Mogami Gold XLR. I need to send my Mogami cable in for a warranty and I didn't want to have my rig down. I can hear the signal and quality of the cables. The only upside that I can see over Mogami is that this cable comes with a 10 year warranty from a company that I am not familiar with. My Mogami cable comes with a lifetime warranty from a company that has been around for a long time.
👤I bought a mic cable for my studio. Light Mogami cable and Neutrik are on the top shelf. So far, so good. The sound quality is good and the connections are tight. I would buy this cable again.
👤The build quality of this cable is great, the connections are secure, and do not get stuck like other cheaper cables. The cable looks good. No interference with the sound.
👤"World's Best Cable" is a good title, but these are the best cables you can buy without a Swiss bank account.
👤An excellent cable. There were zero complaints.
👤The jacket on these cables is very soft. The audio quality is great, the coil is well made, and I couldn't have asked for more. I didn't know I could have asked for it.
👤Mogami gets thrown around a lot because of research done on balanced XLR vs RCA for studio sound and on my hifi setup. I'm never buying into spending $500+ on cables and thinking they'll make a difference when compared to something else. The sound quality over my Audioquest RCA interconnects is very good, even though the length was more than I needed. The bass is a bit more powerful. These are a great value for connecting your preamplifier to a power amplifier. If they're studio reference quality, and connect point A to point B like the $500+ "audiophile" fancy cables without the extra $380 of external jacketing, then it's all you're paying for. I'll definitely be buying more cables if I get an external multi-channel amplifier or nearfield powered studio monitors.
A nitrogen-assisted soldering process unique to them, exceeding industry standards, improves integrity of solder joints over traditional methods. Canare L-4E6S is an ultra-durable Star Quad audio cable for high-end audio applications. Even in extreme cold weather, 40 separate strands in each conductor result in improved strength and flexibility. The Star-Quad design reduces noise. Canare is well known for its sound quality as well as its reliability, and it is also known for its superior sonic performance for professional audio users. Canare makes the best audio and video cable, tools and accessories. They have been fulfilling the needs of professionals for over four decades. Canare's product is reliable and used by many professional broadcast engineers, sound technicians, A/V facility integrators, design consultants, and many leading OEM's. Canare is the Professionals Choice! The AX (Professional) series has great reliability, improved contact integrity, and reduced cable strain. The Zinc diecast Shell and Silver-plated Machined contacts of the connectors make them superior to the cheap ones on the market. All of their custom made cables are soldered with a Proprietary 4% Silver solder blend, developed by World's Best Cables, which exceeds the highest industry standards, and a specially developed, Proprietary Nitrogen-Assisted soldering process, which is unique to them. Each cable is 3 feet long.
👤Well built cables. Sturdy. I am using a vintage PS Audio pre-amp and a 4BST amplifier. The XLR is balanced and quiet. There was no edge or harshness. Music and soundstaging bloom naturally if just let it. Complex orchestral music, opera, or rock sounds uncongested and grainless. Clarinets, bassoons, trumpets, french horns, strings, voices, guitars all have a real color and texture. Audioquest and Better Cables sound a little more strident than the more expensive cables. Why spend more on cables that are not normal? The value is outstanding.
👤It's about the least you can spend on a balanced audio cable and still get good sound. You can't really touch these at the price. It would take at least 3 times as much to get a minor improvement. If you need a set of balanced cables for hi- if use, you can't go wrong at this price. Spending more will yield better sound, but it is a small improvement for a lot more coin.
👤I have a high end system that includes an SMSL dac and my preamplifier. The balanced output is better sounding than the rca outs even when using more expensive cables. It took 20 hours for the break to be over. The sound is smooth and neutral. I did an A/B test against an entry level set that cost $16 a pair. There was no comparison after 10 seconds of listening. The cheaper cable was dull and lifeless. These cables are very detailed. I'm very happy with the purchase.
👤I didn't want the cheapest cables that might fail in the most basic way, but certainly didn't want to pay any premium for dubious performance claims. These use brand name materials and handle well. The cables are supple. I use them to connect a DAC to a passive volume control. I can position the volume knob on my desk if I have a little length.
👤The sound is great in a high-end stereo. I did an A/B test using a high quality relay switch box. The sound of the Carnare is very good. It's hard to detect the difference between the two. Don't buy overpriced cables.
👤Well-made and works. I haven't disassembled them to check out the soldering, but so far they seem well-made and functional in my small home recording studio. I'm using the SM7B with the Cloudlifter. Couldn't be happier with the noise floor and sound.
👤I've purchased many WBC cables. Excellent build quality, decent prices, and good components make this company a great choice.
👤I needed this for my equipment. The sound quality was better than the cables I had before.
👤The Canare sounds warmer than the "3 Foot - Quad Balanced Microphone Cable Custom Made by World's Best Cables - Using Mogami 2534 Wire and Neutrik NC3MXX-B Male & NC3FXX-B Female XLR" The Mogami is more laid back and has a better soundstage, which is better for orchestral music and gives a unique experience. Both are good quality and expose more details than usual chifi cables.
A balanced male XLR to 1/2 is used to connect an XLR cable to a jack. The male 1/2 to XLR is a pro-grade performance. The male 1/2 inch to XLR adapter is made of strong metal. The 2-pack male to male XLR to TRS is convenient and cost effective.
👤The female plugs on the Topping are too close together. These are not a good idea for this DAC.
👤It worked out as expected. It was used to connect the main speakers to the console. They were able to plug in the adapters next to the mixer without feeling like they were stuck.
👤I am not an audio person, but I keep at least one of these in my travel tech kit and they worked for the situation many times.
👤I was very pleased with the adapter, it was exactly what I needed and works well.
👤It worked as described. It's a great alternative for connection and cost.
👤These are reliable and solid. I have had some that have fallen apart but these have been great so far.
👤It's good to have in your studio accessories. The job is done.
👤No one dislikes a good product.
Worlds best microphone cable xlr to trs products from Monoprice. In this article about worlds best microphone cable xlr to trs you can see why people choose the product. Coluber Cable and Tisino are also good brands to look for when you are finding worlds best microphone cable xlr to trs.
Monoprice, Coluber Cable and Tisino are some of the best brands that chosen by people for worlds best microphone cable xlr to trs. Find the detail in this article. D'addario Accessories, Worlds Best Cables and Gls Audio are also brands that their products are worth to check.