High quality noise free performance. Adapt a deafness sign. The balanced signal can be easily adjusted from XLR to 14” TRS or vice versa. It's a great way to plug microphone cables into the digital audio workstations. Low noise, max power. The compact 14” male balanced to XLR female adapter uses the highest quality conductors and components to provide convenience, maximum power and clean signal transfer. D'Addario accessories cables use exclusive In-out Technology for the longest life possible. There are D'ADDARIO accessories. For over 20 years, D' Addario has been leading the industry in innovative and problem-solving products that serve musicians. There are D'ADDARIO accessories. For over 20 years, D' Addario has been leading the industry in innovative and problem-solving products that serve musicians.
👤The price is good but not good for sound quality. I ordered this based on price. The sound level was raised when you bought a different brand.
👤I bought this to plug my mic into a mic cable, but it didn't work out because I didn't have a level out of the mic. I thought the problem was with the amplifier, but I tested it with a different input and it was fine. I know how to use the mic and cable. It must be an accessory. Very disappointed.
👤I used to have a similar product that I used to connect a standard microphone with a mic stand to an amplifier. That was much more expensive than this one. It's small, but it's well-built and should last a long time.
👤I don't like the electronics part of a music system. I was going to a place to play and they had a head with a plug in. My mics have a plug in. The adapter worked. The adapter seemed sturdy and everything fit. I only used them once. The mics were not loud. This may be the type of mic I own.
👤If you are working in a venue with its own amplifier, you need to have a device that fits on my cables, because you never know what connection types they will have. A few of them in your bag will solve the problem. It's a great value and it's a solid adaptor.
👤I ordered the wrong one, but the support was outstanding.
👤It works great. I needed a few of these when I was going between my two homes. The smaller version became much more usable for my situation, even though the larger version had multiple outs. For me, they are great.
👤It looked nice, but didn't work with my microphone. I wonder if it is compatible with my microphone.
👤Good quality long cables tend to take up a lot of storage space and cost a lot of money, so it would be helpful to have every cable we are likely to use. Sometimes we don't have the right cable with us and a box full of adapters can save the day. I needed a long stereo cable terminated at one end by a trs jack but with only a balanced cable available, this Planet Waves adapter sorted the other end for me. A happy performer with a problem solved in minutes.
👤This is not usable when used with any other jack plug. Don't. Buy a dedicated cable.
👤It works with the planet waves audio cable. Very nice.
👤It makes a difference to the tone. You can feel that one of these won't break down when you hook it up to other cables.
The microphone cable can be used to connect to various audio devices such as professional recording studios, schools, churches, public speaking, live performances, parties, etc. The male is 6.35mm in length. Female cable support can be used in applications such as microphone connection and audio electronics. The strain relief on the male component is molded to support a microphone. Double foiling of copper foil and aluminum foil can make OFC conductors high-purity, which can make maximum signal transmission. It suppresses RFI and EMI.
👤It works like a charm when you convert the signal to the mixer input.
👤Excellent and well-built cable for conversion.
👤Exactly what I needed to make my system work.
👤It was great to connect my mic to the speaker.
👤When ordering on July 3, it said delivery on July 7.
👤I can easily hear ground noise when you touch the wire.
👤The product would recommend it.
This is a custom built cable assembly. The cable assembly is made using the Mogami 2549 wire. If you can't find the length or type of cable you are looking for, please contact them, they will try to assemble the required cable for you. Mogami is one of the most sought after Pro cable brands and is preferred by major recording studios and leading sound engineers around the world. Mogami cables are made in Japan using the best materials and technological expertise of decades of R&D. Neutrik AG-Liechtenstein is the world's leading brand for professional audio connections. The XX series features Gold plated contacts and comes in a black metal housing. Neutrik AG-Liechtenstein is the world's leading brand for professional audio connections. The XX series features Gold plated contacts and comes in a black metal housing. A nitrogen-assisted soldering process unique to them, exceeding industry standards, improves integrity of solder joints over traditional methods.
👤I had to replace my original poured because I was still getting interference from the monitor that sits very close to it. Even though I was able to identify the source, the monitor was still plugged in and it didn't solve the problem. I replaced the cord with a solid one that was very flexible, and the end clip snapped into the microphone and mixer. I will purchase another one if I ever need it.
👤When I noticed distortion from my main speaker, I replaced my Amazon XLR cables. The noise disappeared when I switched cables. I decided to look for better cables that had better end connections and eliminated outside noise interferences, and I found these XLR cables. The music was much more focused and defined after I plugged them in, and I immediately noticed the humming from the Parasound amplifier had stopped. I would have found these cables sooner. These cables are a good deal. Don't hesitate to buy them. You will be spending more money on cables.
👤I usually make my own cables because I can solder, I'm picky and I'm a cheapskate. It is an exception for me. These cables are well-made, use extremely high-quality parts, and are often the same price or cheaper than making them yourself, unless you buy in bulk and plan to make a bunch of cables. It's always been great when I open every cable I receive to check the quality. I have a few of their products already, but this particular cable uses my favorite cabling and is an excellent way for me to get a shorter length without breaking out the soldering iron. Good stuff.
👤Excellent quality, dead quiet at a small fraction of the cost of the brands. The Mogami wire is the same. You would have to pay $70.
👤The device is called the RME ADI-2 DAC FS. When things go crazy, the bass won't lose clarity because it's neutral and low-noise.
👤These cables are very high quality. The signal quality seems to be excellent, the connectors are solid and hold firm, and all at a very good price.
👤It was a good sound for a good price. Quality is topnotch.
👤Excellent quality and fits well. A Focusrite Audio Interface was connected to a Shure SM58
98% braided shield. Cotton Yarn Wrap reduces noise. The cable strain relief has gold plated contacts. High quality road and cable. 5 year warranty.
👤I've been very pleased with this cable. Local stores don't have these cables. Especially in different lengths and colors. I like to identify my own cables by using colors, but other band members lose their black cords. I use them 3 to 4 times a week and they seem to be holding up nicely, it's just 888-353-1299 I use them 3 to 4 times a week and they seem to be holding up nicely. I ordered more if that's a sign that I recommend them.
👤The microphone cords were just as advertised. The sound quality is very good. The real test will be endurance. Will submit a revised review if necessary.
👤I use this to connect a microphone to my Denon Mixer when DJing and for others to use when they want to speak, it gives me a back up for the wireless system in case I have trouble with the wireless mic.
👤I haven't had the cables for a while, but they have quality heavy connections. The jacks are gold plated. I am using them to run from my mixer to my fx/amp rack in a mobile DJ rig, they have worked well so far and there is no noise or signal loss. Very happy. Would purchase again.
👤These are what I buy when I am a full time pro.
👤I use the only brand. I tear down and set up a lot when I am a professional dj. There were no issues with these cables. The best I have used.
👤It works well and stands out from the other cables.
👤I found the cables to be high quality and will last for a long time.
👤Fast delivery, smooth teansaction. A number.
A nitrogen-assisted soldering process unique to them, exceeding industry standards, improves integrity of solder joints over traditional methods. Canare L-4E6S is an ultra-durable Star Quad audio cable for high-end audio applications. Even in extreme cold weather, 40 separate strands in each conductor result in improved strength and flexibility. The Star-Quad design reduces noise. Canare is well known for its sound quality as well as its reliability, and it is also known for its superior sonic performance for professional audio users. Canare makes the best audio and video cable, tools and accessories. They have been fulfilling the needs of professionals for over four decades. Canare's product is reliable and used by many professional broadcast engineers, sound technicians, A/V facility integrators, design consultants, and many leading OEM's. Canare is the Professionals Choice! The AX (Professional) series has great reliability, improved contact integrity, and reduced cable strain. The Zinc diecast Shell and Silver-plated Machined contacts of the connectors make them superior to the cheap ones on the market. All of their custom made cables are soldered with a Proprietary 4% Silver solder blend, developed by World's Best Cables, which exceeds the highest industry standards, and a specially developed, Proprietary Nitrogen-Assisted soldering process, which is unique to them. Each cable is 1 foot long.
👤The perfect connection between my amplifier and balanced amplifier. There is a Do not look for another size if you have an average size stack. These are great. I wanted to be shorter, but I am glad I got these. The cables look great. I will never have to buy another set of these because they are solidly attached to the cables. There is no noise other than music on my amplifier. I wouldn't need to buy again because of this level of quality.
👤I needed some short cables to connect the units after I invested in a new midrange desktop DAC andAMP setup. I decided if I was spending that much time with headphones on my head, I needed a decent system. I wanted to make sure the sound floor was as quiet as possible and these cables do just that. It was well made. It's good. It was short. There are good connections from the DAC to theAMP. Really like the cables. There were no complaints.
👤Good cables for a good price. The connections are secure. The cable is flexible. I have not experienced any interference, interference, or interference. My bedroom setup is packed with a TV, a cable box, a classAB amplifier, a headphone amplifier, and a passive preamplifier/switcher. That says it all.
👤If you get quality cables with a quad core, you will get the benefit of noiseless connections and pure sound. I use these with the Topping D90 and Monolith 887 chain. These cables are a solid price and they are very happy with the quality.
👤The picture shows the actual head in a different position than the one in the product run picture. This is important whenradial needs the cable to lock in. It slips out when moving a mic or guitar. They are a Solid build.
👤Excellent quality cables. My D90S is connected to my Geshelli Archel 2.5 XL. I'm loving the extra power balanced mode, thanks to these cables. There is a I was sold after I saw that these use Canare wire.
👤Excellent quality cables. It's used to connect a balanced amplifier to a balanced dac. It works well. In the past, cheaper brands had issues. Canare is used for peace of mind.
👤There's not much to say about this: it's manufactured with high quality and works perfectly between my Topping DX-7 Pro and Monolith headphone amplifier.
Mogami's Lifetime "No Excuses" Warranty is included in all brand new Mogami cables and is proudly supported by Mogami and their dedicated network of authorized dealers. Mogami Cable's Lifetime "No Excuses" Warranty specification can be found here. The pro grade XLR cable is available. Professional Series XLR Plugs are the best choice for professional audio equipment. The perfect sound quality can be given to you. 20 AWG 4N Oxygen Free Copper with shielding, foil shielding and metal braid shield eliminate interference, deliver pristine sound, noise shielding, No hum, no noise, crystal clear music. A high quality performance. The right size, they always fit correctly, and the 24k Gold-Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensure minimum signal loss transfer. DURABILITY. The cable body is outside diameter is 6.0mm. The wire is flexible and strong, Environmentally friendly, and has a long service life. The 6.35mm cable can be used with the 3 pin XLR and 6.35mm sockets.
👤The piano was used to hook the PA set.
👤If I touch or move the cable, it makes a noise.
👤I have been using this cable for a few weeks to connect my computer to my mixer. I'm happy to say that everything is going well. No issues. It's a good recommendation!
👤The product was great. It was what I expected. I usually buy this product from the store. I am glad I ordered this.
👤I'm doing everything and it works.
👤The cable is great for the price. Well built, sturdy and good sound. Can't ask for more.
The male cable has easy-grip treads for frequent unplugging. The pro grade XLR cable is available. The Professional Series XLR Plugs are designed to connect an audio device with a mini stereo phone output to professional audio gear. It's ideal for connecting a portable device to a mixing console. The perfect sound quality can be given to you. 20 AWG 4N Oxygen Free Copper with shielding, foil shielding and metal braid shield eliminate interference, deliver pristine sound, noise shielding, No hum, no noise, crystal clear music. A high quality performance. The right size, they always fit correctly, and the 24k Gold-Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensure minimum signal loss transfer. DURABILITY. The wire is strong and flexible. The braided nylon exterior makes audio cables tangle free. There is a ring type. The Ring/Cold Right Channel on the 3.5mm TRS Plug is wired to the Red XLR.
👤If there was a single function for a 3.5mm to XLR, you would design this. They have many purposes. If you want your studio monitors to be more than 15 inches apart, then this cable is not for you. I'm not sure why a company would build cables like this. They are going in the trash. I had to take them apart to see if they were worth the effort of rebuilding. The inside wiring is not special at all. It is rather weak. I could build a far superior product at my local hardware store for half the price or the same price, and I plan on doing so. You will be fine if you use this for a mixer. These are not the monitors you are looking for.
👤I didn't understand the product. I thought the sound would be mono on both ends, but it was stereo left and right. Did what was supposed to be done.
👤The product worked well for us to get the sound we needed from the back out of our sound board in stereo to use for our live-streaming. The quality of the product is excellent. They are both colored red and blue.
👤This took the place of a PCDI. I love the cables of this company. The name sounds right. It's funny. The cable quality is excellent. The wiring pinout was included in the advertisment. This is a true Y cable. You can't be sure if the areade is soldered correctly if it has thinner cable. The cable is full insulated and wired correctly. I like the cable and noticed that the sound quality was different when I plugged it in. I have recommended them to other people who have also bought them.
👤I love the cables of this company. The name sounds right. It's funny. The cable quality is excellent. The wiring pinout was included in the advertisment. This is a true Y cable. You can't be sure if the areade is soldered correctly if it has thinner cable. The cable is full insulated and wired correctly. I like the cable and noticed that the sound quality was different when I plugged it in. I have recommended them to other people who have also bought them.
👤The Balanced Audio Converter Cable is used in conjunction with this. The par has 3.5mm connections. The Audio Technica AT822 has an unbalanced output that runs off a battery, but this set will allow use on a stereo mic. I can use this cable to patch into a stereo recorder or mixer.
👤The mini stereo plug was 3.55mm larger than stated in the description. It wouldn't fit in the 3.5mm jack of my video camera microphone input. The cable is working well after I replaced the mini plug.
👤It was very well made. I used this cable on another project and it worked great. The cable is of good quality. There is a piece of plastic at the split of the right and left XLR. I recommend these connections if they are the correct ones.
The cable is compatible with a microphone, PA mixing board, guitar amplifier, and other equipment with a 3-pin XLR connection. The heavy duty flexible rubber jacket is made of rubber. The metal 3 Pin Male XLR has a 1/4" end. The rubber booty has a strain relief. The copper conductors and shield are both high grade. High quality noise free performance.
👤I was looking for an affordable solution that would allow me to place the speakers further apart. My current configuration is a DAC with L/R output and two cables from AQ. The location of the volume knob was too far away from the setup, which has worked for years. I wanted to simplify it while also removing unnecessary sources. I wanted the old XLR cables to be 25 feet long. Buying long cables from the same brand would make them more expensive than the monitors themselves. There is a The solution is the output through 6.3mm. The Stereo to L/R is 6.3mm to the 25 foot cables. Works well! Great cables.
👤I bought two of these at the same time to use them to send stereo audio from my effects rig to my speakers. I bought the cables after buying the speakers. I didn't understand why I only had one speaker to output sound. I was too busy practicing to think about it. A mono powered speaker is all that is needed for practicing. It became painfully clear when I was using one of the cables to run from a soundboard to my speaker as a monitor at a paid gig. A guitar player in the band had a spare speaker cable and it worked perfectly out of the board to the monitor. I was able to conclude that one of the cables I bought was broken as soon as it was put together. I can't recommend them as a result.
👤I got this male to a small cord so I could use it with my new pedal. The picture on the back of the box was the only directions that came with the pedal. I bought some patch cords just in case I needed them to connect the HS2 to other devices. I haven't used it yet, but I am using the same patch cord from GLS, and I love it! I was able to enjoy my new toys immediately.
👤The cables are thrown into a bag. The end of this one is already loose. It does work well, but it's not durable. If you're not as hard on equipment as I am, then this is for you.
👤It arrived early. It was tried out at a church gathering. It worked well without any issues. Excellent quality was present. Can't beat the great. The price.
👤I was not sure if this product would work for what I was going to use it for, but it did, and I am so proud of it. I used this cable to connect my keyboard to a snake box. The cord is strong. Both ends are secure. It seems like a steal for the price.
👤I have a lot of GLS cables. My mixer needed this one. They come with cables to keep them tidy when not in use. This brand is very good.
👤Great cables. When you unwrap, throw around, re-wrap, and throw them in a crate with 400 plus miles of other cables, you find out how well they're built. I have to say that. I've been using INRDeals
The internal strain relief on the XLR is rugged. Oxygen-Free Copper conductors are used for enhanced signal clarity. The OFC spiral shields are used for RFI rejection. It's ideal for use with mixing consoles. There are 8 male connections.
👤I ordered this item while I was installing a Pro Tools system. The 192 outputs were connected to the room equalizers. The left-front channel was low in level after everything was installed. I took the rough, cheaply made XLR connection apart and was horrified by the shoddy look of the wire and the amateurish soldering. One leg of the balanced pair wasn't making a good connection because of a cold solder joint. I replaced the snake with a new one from another manufacturer after I got the system online again. Ask any wiring professional if HOSA is junk. I wish I had not allowed myself to be lured in by the low price. I can't return the packaging material that I threw out. Live and learn.
👤I have snakes for people. They work well. I use the splitters to feed the recording rig so that I can observe the noise and distortion levels. That is notexistent. I'm sure there are cases where bad solder joints could cause shorts. I have never experienced that with Hosa products. I share the concern that people have about the longevity of the snakes if they are used in a daily touring environment. The individual leads are not very strong. I don't let apes help with tear-down and I am not very rough on equipment. That's where the damage can occur. If you are a touring company, you already know you should be spending more money. Hosa products are a good choice for most of us.
👤There were several screws that were missing. I should not have a problem using it that way. I wouldn't use it for touring. I would return it. I needed it immediately. It works, but it is being used as a permanent installation so the cables are not touched. The colors help keep the cables routes correct. I'm not getting any bad connections or crackling so I'm happy. Check the screws if you aren't in a rush. It looks sloppy.
👤We use this to get a clean copy of 8 channels before we use the audio mixer. Then it is put into an audio interface to mix for the live stream. There were no issues with the product. The main mixer provides phantom power and gain to mics, but I get back from this wire a great signal to use for livestream.
👤It's easy to wire up some equipment. If you only need a couple of wires, you can go the diy route. Save time if necessary. They pay for themselves in less than an hour.
👤This isn't compatible with TasCAM. They say it's compatible with any system, but that's not true as there are different pin setups. The pins on my device were very flimsy. It's not worth it and what the hell is up with price hid until purchase? That should be banned.
👤It is clearly marked. It seems rugged. Time will tell.
👤The cable doesn't look very durable. Don't use it for a show. If you plan on keeping it in the same location or can fix a break in the future, it's a great price.
Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices. Engineers and artists trust Mogami GOLD STUDIO XLR Microphone Cables for their professional results. Mogami GOLD STUDIO XLR Microphone Cables help to cure many of the problems encountered in a typical project or home studio by providing an enhanced dynamic range with a pin-drop quiet recording environment. Mogami Gold STUDIO XLR mic cables are wired with Mogami Neglex Quad High Definition microphone cable, which has the highest cancellation of noise and RF interference. Mogami's quad cable design is renowned for vastly improving the rejection of noise to the tune of a 95% quieter background as compared to the best 2-conductor microphone cable. Use Mogami GOLD STUDIO XLR Cables for pro audio sound with nearly any device that has an industry-standard XLR 3-pin input or output. There are a lot of common uses for mixers, preamplifiers, amplifier, audio interface, loudspeakers, powered speakers, studio monitors, and more. Excellent for use with amplification, percussion, and vocalist mics. The Mogami GOLD STUDIO-03 XLR Microphone Cable is 3 feet long. The Mogami GOLD STUDIO XLR Microphone Cable series can be found in 2, 6, 10, 15, 25, 50, 75, and 100 foot lengths. Mogami's Lifetime "No Excuses" Warranty is included in all brand new Mogami cables and is proudly supported by Mogami and their dedicated network of authorized dealers. Mogami Cable's Lifetime "No Excuses" Warranty specification can be found here.
👤I didn't spend a lot of money on cables for my studio. Three years into recording/mixing full time, I was amazed at the difference between my LyxPro xlrs and Mogami Gold. I wanted to replace my cables immediately, but I didn't want to spend a lot of money on Mogami. The Canare L-4E6S or Gotham GAC 4/1 cables are the same performance for less, but no lifetime warranty like Mogami.
👤Next day, the 3' Mogami Gold cable arrived appropriately packed. It looks like it is authentic. It works. I can't hear a difference between it and the generic cable it's replacing. That may be my problem, or the mixed quality of my current recording material. I went with the brand name because I didn't want to worry about connecting cables. There are no regrets. The cable was delivered in a plastic pouch and there was no return address. There was nothing else in the bag. There was no retail packaging, no invoice, no message from the seller, no description of the contents, no instruction on how to deal with any problems, and no contact info for Zorro Sounds. Zorro Sounds' name doesn't show up anywhere. How authentic is the cable? There is a well-produced rant accusing Zorro Sounds of deceptive practices. If I didn't have doubts about the seller, I would give five stars. I spent a lot of time learning about Mogami and how it's made. I think the cable is authentic, but that work shouldn't be necessary. Worst case is that I've over-paid for a good cable. The seller's name was changed to BDR Pro. Caveat Emptor. Ps. The cable length is over 36 inches between the two connections.
👤These work well in my audio system between the amplifier and the preamplifier. I don't know why anyone would spend that much for a cable, but I have seen similar cables for 100's or even 1000's. You must have a lot of money in piles to think that there is much improvement beyond what a quality cable such as Mogami would provide. The ends of the cables are high quality and the expense seems to be dedicated. I have purchased generic brands for my surround channels, but the connections on these are better. A full Atmos channel system set of cables (11 speakers and a sub) composed of all Mogami gold cables was more than I wanted to spend so I choose two types for comparison. I kept the Mogami's for the clear quality construction because the sonic quality of the cables doesn't seem to vary for the short length between a pre-amp to an amplifier setup. I use cheaper Mogamis for the front three channels. I might upgrade them someday, but it's not a high priority for my system.
👤The person who sold me the Adcom GFP-750 told me to buy these to replace the cables from my OPPO BDP-95 to my Adcom GFA-555II. The difference was noticeable. The cables bring the sound of my stereo one step closer to the studio sound. I can hear the sound of Alison Krauss' mouth as she writes her songs in her So Long So Wrong CD. You need to hear the difference to believe it. It seems that these are used in recording studios all over the world.
The conductors have aluminum foil shielding. There are eight balanced mono or unbalanced stereo lines. There are two ends of a male plug on one end and another end on the other end. Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.
👤I needed this product to run multi tracks in live performances. I quickly saw the cables after opening the box. I noticed that some of the heads of the output were missing when I tried out the product. I couldn't use them. I needed all the outputs to run separate tracks. The rubber ends were ripped. This was the first time I used it. The interface that I used for the cables would lose signal if I tried to use it again. I did not have that issue because I used different cables. The cable patch failed me completely and affected my performance.
👤Everything works on this snake. I think it may go bad eventually because there is nothing that makes the build quality stand out. I think it would be a bit more durable if it were nuetriks. You get what you pay for. I needed a quick fix. Sound quality seems unaffected.
👤There were no issues from the snakes when I bought one of the 10ft and two 3ft. I got one at a significant discount buying used but they are worth it for the quality. I have never had an issue with Mono cablingprice.
👤I bought a pair of these for my console, which means I can use it as a monitor desk or front of house, depending on the gig. The price of these cables made this purchase a no-brainer.
👤An 8 channel snake for $20! The cable works perfectly to bring the tracks from my Tascam 8-track into my DAW interface. It's perfect - I love it! It's a good thing.
👤The cables work well to connect our new brain to the sound system.
👤It's a great buy for the quality of the product.
👤The work is good for my needs.
👤This was perfect for my audio interface. The trs and xlr side seem solid. The colors are useful, but wish it was all black, so it didn't stand out as much.
👤The quality is really good for the price, and I'm using it to run aux out from the mixer to run to a wired ear monitor.
👤Well built cables. The color coding is clear. I would expect balanced audio to be run from a sound board to an audio interface unit. There were no noise issues.
👤The item was damaged when it arrived. I would have liked it better if it had arrived fully functional. It is a good price and decent quality that can be installed once and left in place. Will purchase again when I need more patching.
👤I use these with a Focusrite and am very satisfied.
World s best cable trs xlr products from D'addario Accessories. In this article about world s best cable trs xlr you can see why people choose the product. Siyear and Worlds Best Cables are also good brands to look for when you are finding world s best cable trs xlr.
D'addario Accessories, Siyear and Worlds Best Cables are some of the best brands that chosen by people for world s best cable trs xlr. Find the detail in this article. Lyxpro, Worlds Best Cables and Jolgoo are also brands that their products are worth to check.