All freestanding parasols with weighted cross base are versatile. You can search for "C-Hopetree cantilever umbrellas" The umbrella base is high quality and can only be used with patio tables. The base has a 10.5” stem. There are a variety of pole sizes, ranging from 1.3” to 1.8” The support knob is used to tighten and secure the umbrella post. There are 4 feet on the bottom of the base.
👤I do not want another stand from the same company, the one I received was broken and already used. I bought an umbrella stand that was good quality, but I don't think it could measure up to the one I bought. Don't send me another one.
👤I didn't get a heavy base. I wish there was more information about the weight. The base is very nice looking. No frills. There is enough room on each side to place two heavy landscape concrete bricks to keep my umbrella anchored to the ground. I did not do my homework. Should have been heavier than 26 pounds to hold the umbrella.
👤The umbrella stands were purchased for sign bases. They are weighted well for that purpose. Since they do the job, it's acceptable. If you need to, you can move them, but do not expect to just slide them over, it is an effort to move them. Love them. I would buy more if needed.
👤This is how we received the item. The concrete was broken in half.
👤I needed a base for my umbrella to work. Other bases were not as heavy as they should be. This one was a great price, had a clean and simple look, and was able to be used with my umbrella pole, which is 1.8” in diameter. Highly recommend this base!
👤I ordered this last month in preparation for the summer, and I opened the box to find it broken and crumbled to pieces on one side. I have to order another one now that the return window has closed.
👤We were told we would need an 80lb base for our umbrella. I got this guy and it works perfect. It's compact so we have plenty of room for everyone at the table.
👤I bought this because it was one of the heavier bases I found. We have to add more weight to this to keep it from blowing over and have to take the umbrella down so it doesn't blow over when we aren't out there. The base and pole broke after being knocked over by wind. This is a bad base. Get something else. I would love to get my money back since it has never worked.
Only for the pear leaf offset patio umbrella, which is special for 11 feet square umbrella and 12 feet round umbrella. The size is 36.6 X 36.6 X 8 inches. PP plastic is hard and weather resistant. 3D surface design is more fashionable. Water and sand can be injected with a full dose. Only and special for the pear leaf patio umbrella.
👤This is where they screw you. The photos of the umbrella show a base. You shop the price of the umbrella and find it is cheaper than at the store. You buy an umbrella, but you discover that the base is not included. You can not return the umbrella because it is huge, you can barely lift it and the packaging is toast. You know that you have been screwed when you get this review. After paying too much for an umbrella and base, you discover that the one from Costco is cheaper. Oh my gosh! Sometimes it's the window. Sometimes the bug is present.
👤Why did you make the fill holes on this large plastic box, if you recommend the use of sand? It will take a long time to fill this bloody thing. Please, redesign this EXPENSIVE piece of plastic: 1) add two more fill-holes, one in each quadrant, allowing ease of distribution of sand; and 2) make the circumference of each hole 3 inches. Look at this item from the perspective of the consumer. I hope to have to fill this once, once and for all. Take my suggestions seriously. Thank you.
👤The product had no wheels. I bought it with wheels. Why would anyone pay for a base without wheels? It was reported to Amazon and they picked it up and sent another one. It did not have wheels. The Chinese maker decided to cheapen the product and remove the wheels. It's typical. Too much trouble to return. Our landfills are full of junk from China. We should send it back to them. This is typical of Chinese manufacturing; great at first, but then they start saving money by sending junk.
👤Once it's filled, it's very strudy. It's a nightmare to fill with sand because the holes are 1.5 inches and it's difficult to distribute it evenly. We will only have to do that one time. It took over an hour.
👤It's a great thing that it won't flip over in the wind since it's hard to move once it's filled with water. If you want to move it, it's not so great.
👤The company should ship with the cap threads backed out because of the pressure on my base caused by the increase in temperature. I had to redo some things because the holes didn't line up perfectly with the umbrella attachment.
👤The bass was filled with water and worked well. It was a little too expensive for the materials and construction that make it up. We have an umbrella that does a good job of keeping it anchored.
👤I thought this was supposed to have wheels to move, but ours didn't. It took some doing to get sand into it. We filled the rest of the sand with water. The pole will have to be broken for the umbrella to come down. It won't be because of the lack of weight in the base.
There are product specifications. The Hummerfest Hummingbird Feeder has a capacity of 12 ounces. The 4 triangular shaped black weight plates are designed to fit in the umbrella cross base and give it a square shape. When filled, the weights will give you the right amount of weight for your umbrella. Purchase sand and use the included plastic funnel to fill each section with sand. The umbrella cross base has weight if you screw the cap on. They're much easier to carry than heavy pavers. They don't damage your area like heavy pavers do. 150 lbs to 180 lbs of weight can be achieved when all 4 plates are filled with sand. The total weight is 180 lbs. with water added to make wet sand. The plate can be filled with wet sand. You can put your umbrella in any location you want by filling the weight plates and securing them on a cross base. It gives you the security and safety that it will support the umbrella in any location. The black plates are more attractive than other base weights. The black plates are made from heavy-duty plastic that is weather resistant, UV protected and waterproof. The Cross Base is not included. Sand is not included.
👤I came up with an idea after reading the scary reviews. It's difficult to use and it's very flimsy. The opening of the water jug or milk jug is snug into the fill hole. I leaned the weight against the fence post after wrapping it around my fence. When the sand clumps up, I use a hose on a jet setting to fill it, the sand went in like water and the weights were nice and heavy. 5 minutes after I came up with this, each one took me less than that. This will save a lot of time for do-it-yourselfers.
👤The Abba 11' umbrella base was perfectly fit by this. The trick to filling it quickly is to use dry sand. The package says "kiln dried", and I used the 1962-51 medium sand. Attach the funnel to the plate opening. The opening doesn't fit the funnel. Place it against the opening and tape it all the way around. You can pour the sand quickly. It will take about a minute to fill them.
👤It appears to be well made and durable. They are required to keep the umbrella standing if I fit the stand perfectly. I used a single bag of sand in each unit, but it was just short of full. I could not simply pour the sand in because it was moist in the plastic bags that came with it. It took over an hour to put it in. Something to keep in mind is not the maker's problem. I had no problem removing the caps with the trowel. You want them to be comfortable. The current weight is 34-37 lbs. Even on windy days, the weight seems sufficient in each section. I can add more water and sand. I was worried that the units could move off the cross legs of the base if they slipped as the pole flexed in the wind. I built a simple collar to keep them in place. The picture is below. It is not attached to the units, but it keeps them from shifting.
👤So far, so good. We filled them with water because we didn't have any sand on hand and also because I like the idea of being able to dump the water out at the end of the season and store them much easier. The water was easy to put in and the umbrella was held up.
👤They work well for their purpose. I was able to fit 30 lbs of sand in each plate. Don't worry about wet sand, the water will evaporate eventually. The plates work together to make a base. They will fit Abba Patio brand cross based umbrellas perfectly, but should also work well with any brand that has a cross base. It's a neater appearance than weight bags, paver stones, or whatever else people use to weigh umbrellas down. They are very difficult to fill with sand. They give you a cheap plastic funnel, but you're trying to pour 120 pounds of sand in this base through holes in each quarter piece, which is at best a 2 inch diameter. Plan to use a lot of time and patience. A better design would be to have the top half of the plate come off, dump the sand in and replace the cover. This arrangement has been seen elsewhere. Whoever designed this didn't bother trying to fill these themselves. These look great, fit perfect, and the base doesn't budge, so they're three stars. I deduct two stars because filling them with sand is an unnecessary chore, and it's a pain in the ass. Don't say I didn't warn you.
We want you to love their product. They will make it right with a prompt replacement or refund if you are not happy with your purchase. The size is 36.6 X 36.6 X 8 inches. Water and sand can be injected, about 280 lbs. PP plastic is hard and weather resistant. Only for the pear leaf offset patio umbrella, which is special for 11 feet square umbrella and 12 feet round umbrella.
👤The base is filled with water and under weighted to hold an umbrella. It's not heavy enough to stay on the ground and protect the umbrella from falling over. Even filled with water, the base is too heavy. We put 100 lbs of disc weights on the far side of the base to keep it stable since we already put the umbrella together. This shouldn't have to be done.
👤The base was undamaged when it arrived. The quality looks great but I hope it lasts a long time. I hope to store umbrella and base in the winter. I was afraid I'd hit a tree root when I looked at the in-ground mount, but it looks well-designed and sturdy. The drain plug is placed low on each of the chambers. I would recommend checking tightness before filling if you're coming from the factory. I have not had any leaks. There are two areas of concern for me. The umbrella's base should be thick enough. When installing bolts, be careful not to cross thread or over tighten. Since it was tight for me to get them started, I would recommend a short wrench with a 6 inch extension to speed things up. How to drain water without losing sand is a second concern. I will ask that in questions. Buy this!
👤Excellent base weight. Very strong. The frame is made of steel. Bolts to the steel frame. Some of the hardware is very strong. There are three options for weight. Sand, water or both. I went for water. It was fairly easy to fill. Put sand in first then add water. It seems to be very sturdy and should last a long time. It's not perfect but can rest fat beverages on it. I will probably look for a small table to fit over it. It has a large footprint.
👤If you fill it with water or sand, you won't be able to move it, so position it before filling. I bought a purple leaf umbrella and this stand works great. The removeable caps on the sides make it easy to empty the stand. It fills from the top.
👤The umbrella is perfect for the sunbrella double top.
👤I filled it with water and it started leaking.
👤There is a cap that holds water in the base. I don't have to return it before the weekend because I need it overnite.
👤When we purchased this stand, we felt there were missing parts and I was ready to return it. The umbrella arrived two days later and all the parts were in it. It was a relief. It was easy to assemble, and very sturdy. If you have a strong son or grandson to help you, it's not impossible to move when it's full of water. Make sure you put it where you want it. Enjoy your umbrella and stand!
It was designed to be weather resistant. The round umbrella base is big enough to hold the umbrella and has two hand-turn knobs for securing it to the base. One hole inside and one knob outside could fix your umbrella. The plastic inserts on top of the steel pipe can be used for umbrella poles. Rust Proof and Anti-corrosion Material is made of durable and weather resistant material. This item is more reliable and durable because it would not let the umbrella tile easily. The umbrella base is black and elegant. You could put it on the balcony, yard or beside the swimming pool. It could be a good partner. When filled with water and sand, the maximum weight is 50 lbs. Also, note: Water and sand are not included in the umbrella base.
👤Disappointed. The tube wouldn't go all the way down in the base. The plastic inside was stopping it. I don't know if it's supposed to go all the way down because the instructions are just a picture of all the parts going together. There is no product or website information. I got this at a garage sale. There was a small "lip" in the inside where two pieces of plastic were fused together imperfectly. I shaved it down and was able to assemble it. I'm happy that the base is assembled. I'm sick to death of companies making my life more difficult because they won't spend an additional $0.01 on decent instructions.
👤I attached my umbrella to the water. The patio umbrella was closed and thrown about 40 feet to the other side of the patio. Due to wall, only stopped. The only way to make this more stable is to add sand, which is very tedious, and you will never be able to get it out. A bad design.
👤Without a table or other support, the umbrella is held upright. I have a 10' diameter market umbrella with a pole. No issues so far with it being tipped over. It might be possible, but so far so good. I try to remember to collapse the umbrella if I know it's going to blow out. There is no chance of the umbrella tipping over if it is folded and tied.
👤The umbrella base is very high quality. Strong and sturdy. My patio umbrella is safe. The shape and design are very nice. There is a If you are looking for a base for your umbrella, take this one.
👤The heavy metal umbrella stand is difficult to move and may stain the pool/patio surface. This stand has a holding tube for the umbrella shaft that passes through the reservoir and a flange to hold it in place. It is easy to disassemble and put away. I did not pull it about by holding the umbrella shaft. The plastic is in the container. I'm inclined to remove the umbrella and drain the reservoir before moving, rather than sliding the stand about fully loaded. The table I purchased on Amazon is low and has a reservoir under it.
👤The old umbrella stand was torn apart in a wind storm and we bought this to replace it. The old metal one is light until the water is added to the base, but it has already tipped over in a strong gust of wind. It weighed about 50 lbs after being filled with water. It is heavy with a big umbrella, so it is vulnerable to tipping over in strong winds. You need to add weight according to other reviews. I'm going to add some weight by putting some bags of sand on the base. The stand is easy to move around on and will work with some extra weight added.
👤While it is nice and heavy, the rocking helps to get the umbrella tipping over in the wind, because the base is rounded like a ball. I have had 2 umbrellas broken in less than a year with this base. Maybe it's only meant to be a base under a patio table. We were standing. The key word was "were".
There is a need for a rough attachment for compatible umbrellas to prevent accidental damage due to falls and bad weather. Water or sand can be filled with up to 40 lbs. Transports easily when empty. It can fill up to 3.8 gallons of water or sand. The total weight is 40 lbs. The sturdy HDPE construction is made from reinforced plastic to endure the elements for years to come. It's ideal for umbrellas from 6 to 10 feet in diameter. It is possible to fit umbrellas with poles up to 1.9in (48mm) in diameter. Home Zone Living support is standing by in Atlanta, Georgia to help keep your outdoor space pristine.
👤These stands are perfect for stand-alone 9 foot umbrellas. When it's windy, we fold the umbrellas down and use the stands. I have had them for over a month now and no umbrellas have fallen over. We put water in ours.
👤I love this umbrella stand. The large size of this stand makes it easy to install a post to secure your umbrella. It went well with my outdoor table. We definitely need more for our outdoor area. This is a must buy.
👤The umbrella base is very sturdy and looks nice. The price was reasonable and I would recommend it to others.
👤I needed a bigger pole insert for my umbrella. This was one of the rare stands that offered that size, but you really need a full size base in order to support the umbrella... It might be ok for a smaller umbrella but not for what I need. I assumed it would be silly. Don't do it, it's good quality materials, but you need a full circle base to do it.
👤My husband left the umbrella open. The entire table and umbrella were tipped over. I wanted it to do what it did. Not completely. Was hoping for better. If the umbrella stays where it is suppose to, it will be seen.
👤The job was done as promised. You can fill it with water and empty it at the end of the season, I love that. I have a sturdy umbrella and it hasn't fallen over yet. I was happy I purchased.
👤The umbrella can't stay in the large color.
👤There was a part that was missing. I have been trying to get involved for over a month. I'm considering returning it.
Only and special for the pear leaf patio umbrella. The bottom is made of high density polyethylene material, waterproof, aging resistance, wear resistance, UV resistance, permanent corrosion free. In all weather, prevent cracking and discoloration. The anti-rust coating on the steel pipe rod makes it appear as if it is not rusty. The umbrella base is elegant and stylish with an eye-catching wicker design. You can put it on the balcony, courtyard or next to the swimming pool to help you enjoy the umbrella. MultiDIMENSIONAL ACCESSORIES can be adjusted according to the thickness of the column and have two pistons for a wide range of applications. The umbrella rod's diameter range is 1.5"-1.9". The easy to transport and store handle design makes it easy to move. You fill the water base and the umbrella can be held in your garden, yard or elsewhere, bringing elegance to your home. It can hold up to 15 liters of water and weigh up to 50LBS. There is a need for a rough attachment for compatible umbrellas to prevent accidental damage due to falls and bad weather.
👤The base is fine. To carry around water. The umbrella pole sleeve is not a snug fit. It comes with a second sleeve that should allow you to tighten it around the pole, so that it won't sway in the wind. It doesn't work. There is a design flaw. If you want a base for a freestanding umbrella, instead of one that goes down the middle of a table, I wouldn't buy it. The pole can be TIGHTENed around if you get one with a longer neck.
👤I would like to read reviews about these in the heat. The pool umbrella fell over a few times because the plastic got hot and flexible and made it lean. It would work if it was used in warm weather. The umbrella will most likely fall if the temperature is hotter. Buying 4 was a waste of money for me.
👤We had an umbrella stand that couldn't hold up to the winds. We have a heavy metal stand that keeps our other umbrella up, but we have to move it to hose the patio. I found a solution that I was looking for. I haven't had to pick up the umbrella since it was up for a couple months. I closed the umbrella because of the heavy winds. The umbrella has been open all summer. I picked up our umbrella at least two or three times a week before I got this stand. It is a piece of cake to drain and fill. No more flimsy stands. It was perfect!
👤Returned. The umbrella tippy is caused by the base bottom not sitting on the deck. The base pole rotates so that the umbrella can move in the stand without being tilted. The umbrella pole and the base pole are not stopped by the screw. The small rubbery feet are not enough to compensate for the fact that the plastic base slides easily. Too bad. It looks nice with our deck furniture. The water fill extends into the base making it impossible to drain the last inch of water. Will make the return interesting.
👤This stand is not for sale. It is supposed to be on a flat surface. The pole in the middle is not close to the base. The worst wobble is created by this. Who would design something like this? There is no way that rain can be piped in. How do you return something that is liquid? Any person that ships anything knows you can't ship liquids without special shipping requirements.
👤A+ for concept and D- for practicality. The base stand should be filled with water. The unit has rollers on one side to help move it around. The base stand material can't support an umbrella upright when exposed to sunlight because it gets soft as it warms. It's useless.
👤The umbrella stand is terrible. The pole is not attached to the base. The pole and umbrella are moving. The entire thing falls over in the breeze. We don't live in a windy area. It doesn't have wheels on the bottom so you can't move it around. Measure your space before buying this useless stand. There is an umbrella stand at a home on the Outer Banks. Even in high winds, it is better designed and never falls over. Save money. I missed the return window.
Also, note: Water and sand are not included in the umbrella base. Totally Rust Free Construction. The Thumb Bolt Locks Umbrella Pole. The length is 6.25 Inches Tall. Accommodates umbrellas up to 1.5 inches in diameter. It is intended for use under patio dining tables.
👤I don't understand the reviews that say this base didn't hold an umbrella. It is meant to be used with a table as an additional support. I'm using mine under a bistro table with a light umbrella. This has been perfect, I didn't see the need to spend a lot of money on my set-up. It protects the umbrella from blowing away by keeping it upright. I was willing to pay the price. I took a star off because the picture makes it look like the holder is made of metal, which I think is misleading. For the money, I think this is a great item.
👤This was the cheapest option. I liked that it could be filled with sand or water, but it didn't support a standard 9ft umbrella.
👤I like the umbrella holder. It's just plastic. It seems rugged. I hold the umbrella well. I bought it because it is low. The stands are too high to support my patio table leg. I found no viable ones in stores. White patio furniture... I would have liked to have bought it in white.
👤I think filling it with water is easier than emptying it with sand. It was very easy to fill it. If the water spills, it will be no big deal because it holds the patio table umbrella securely. It is small enough that you don't have to kick it when you sit at the table. This works for me.
👤It was not heavy enough to hold an umbrella in the wind. The stem/tube for the pole broke when I weighed it down. This might help with a table that holds an umbrella, but it's not good on its own.
👤I can say that it does the job, because I have used it most of the summer. I thought I would put sand in it, but it was better to put water in it. It's pretty much not needed. That's right... Put it in the water and cap it off. The umbrella I placed through the patio table was taken care of by the wind gusts on my deck. This did the job.
👤There is nothing bronze about this base. I have a larger umbrella base that costs half the price, and I can't believe that it costs so much. I thought the price was justified. The description is not accurate. Save your money if you are ok with plastic.
👤I was expecting the umbrella base to hold the umbrella upright, but it didn't. Wrong. I filled it with water and installed it. I left the umbrella in a closed state. The umbrella fell over as I walked back into the house. I put it back up, and it fell over again. The water was drained and replaced with sand. The base was heavier. I put the umbrella pole back in place. It fell over again. This thing is useless. It is not wide enough to support an open umbrella. It would cost me more in diesel fuel to drive to a return place so I am just chalking it up to a bad experience. Don't spend your money on this.
The package includes aumbrella base and two couplers to fit both 1.38" and 1.8" poles. It is designed to be used only with a patio table. In any weather climate, the umbrella base is durable. The U.V. stabilizer is made in the United States. Do not add water to the empty base, it will be filled with sand or gravel. The umbrella base can be easily moved using the EZ grip. The product is only advertised for use as an umbrella base.
👤We ordered two of them. On the first day of the year when the temperatures hit the mid-90s, the plastic softened and caved in, causing our umbrella to tip over. It has become a new, ugly shape and is useless. We live on a mountain in upstate New York, where the temperature rarely gets this hot. I don't think this base did well in Phoenix, where it's hot and sunny all the time. I don't recommend this product.
👤It took about 1/3 of a bag of play sand to be filled and 30 minutes to be finished. I did this with my last one and it worked well. The handle is built into the base.
👤This arrived today. I was surprised that it was a huge box and it weighed less than 10 lbs. It is light and plastic. I think I bought it used. How will this hold up on an umbrella? I couldn't move it even with the handle if it was filled with water. I am happy for 16. Santa Ana winds are high in So Cal today so it is holding up. It's not moving. I fill with water because it never gets cold enough in So Cal.
👤I like the product. What is wrong with the attached picture? It's funny. I will have to cut out my own fill hole. Where was the quality control on this one?
👤I wondered if I should buy this base after reading reviews. I sold the Subrella base and market umbrella because they were too heavy to manage over time. Decided to use the Campari umbrella with this base. If it will be staying outdoors, it's a good idea to not fill with water. One reviewer said that installing sand is difficult for one person. I checked out birdseeds, but then noticed the kitty litter just down the aisle, and realized that a good clay based kitty litter would be the ideal weight and content. The Campari umbrella is an ideal base for it because it is made from a piece of cardboard and it is easy to install. The base is not heavy to be relocated. The weight of the plastic is excellent. There is a A good buy at a good price.
👤The base does not fit the recommended 60 lbs of sand. The hole for the pole is too small and the pole won't go to the bottom of the base, making it very unstable. We filled the base with sand and tried to put the pole in. Do not recommend it. It's full of sand and broke when we tried to put the pole in. The $20 was wasted on a cheap base.
👤We had a problem with the strong wind gusts falling over our umbrella. We have had several heavy stands, but this one seems to be working well. We are very pleased with this stand.
👤These were found online by my husband. My umbrellas would fall over when the wind was small. I was worried that these wouldn't be as nice as the metal stands. I couldn't be more happy! These stands look good. They held up in a 20 mile gust of wind. We bought 5 more for ourselves and 2 for my mom.
The PFFY Compact Travel Umbrella is waterproof. The fabric made of pongee is thicker and more resistant than other fabrics. The umbrella base is made of waterproof, aging resistance, wear-resistant, anti ultraviolet strong and permanently not corroded. The umbrella stand has a classic decorative pattern and black finish that will last for many years. The patio umbrella base can be adjusted according to the thickness of the umbrella column. The diameter of the umbrella pole is 1.49". The umbrella base stand has a knob for securing the umbrella to the base. The overall size is 16.5" x 12.6 x"H. It is easy to assemble and store for home and commercial use. There are many places to apply for, including a villa, hotel, terrace, balcony, resort, water park, barbecue bar, western restaurant, beauty salon, outdoor leisure umbrella base, outdoor parasol base, market umbrella base, company rest area, etc.
👤My first umbrella. I didn't know anything about umbrellas or the base they need to stand upon, so I relied on positive Amazon reviews to make my decision. This particular base had a lot of positive feedback. The base was easy to put together with each piece marked in the instruction manual. It was screwed together in about five minutes. There were no problems at all. At 22 lbs. The base has a lot of weight. It was difficult to tip the umbrella over. I feel very confident that my umbrella is safe in a closed position, while sitting in this base. It has a nice design which can be seen in one of my photos. The base needs to fit different sized poles and that's why there's aremovable piston on the mounting bar. I had to remove the umbrella part. I wasn't sure if I should be doing this as the piston looks like it protects water from getting inside. I have been reassured by other customers that removing this piece is fine, if it means fitting your umbrella into it. This base is a good one to recommend. I am very happy with the purchase.
👤I was a bit leery of buying an umbrella stand online as you never really know what it will look like, but this was everything it was advertised as, it's heavy duty, easy to assemble, and it has an attractive not too-in-your face basket-weave pattern.
👤The base is heavy and holds our umbrella. We live in a coastal area that is windy and we have had no problems with our umbrella pulling away from this base. I would recommend this base to anyone.
👤Nice and heavy. Two people thread an umbrella post in. It looks great under a table.
👤The umbrella stand is strong. The umbrella is held in place by it. I would buy this item again.
👤Works well! I needed something to hold my umbrella.
👤This is a great umbrella base. It was easy to assemble, and it was pleasing to the eye. We had major storms that uprooted trees and had it at the base of our table and umbrella for a few weeks, but it held up just fine.
Also, note: Water and sand are not included in the umbrella base. Made of heavy-duty plastic with a UV protection coating. Convenient filling, cleaning, and storage can be done with the easy-to-fill spout. Sturdy 4 square plate construction supports your umbrella stand. Plates provide additional weight and keep your umbrella stable. It's perfect for all types of patio umbrellam. The dimensions are 39.7" L x 39.7" W x3" H.
👤There were 2 major problems with this set. The holes in the sand and water are different sizes. This is a manufacturing problem. Only one of the 4 has a large enough hole to fit in the opening of a bottle. The others were smaller. I ended up filling them up with water because I intended to fill them with sand. 2. The umbrella base is not compatible with the U locks. The base legs of my umbrella base were a little bigger than the pieces, so I couldn't connect them. The legs are higher than the bases. The U locks are not compatible with either of these issues.
👤We have had a bit of rain and wind, but my umbrella is still standing. My son dropped one of the sections off the ground at the most, and it cracked, and water leaks everywhere, all the time, when we were setting this up. I have to keep this section flipped upside down because it's not cute because it cracked from the underside. It takes a long time to drain water. It does its job, but I'm not too happy about that. grrrrrrrr
👤I bought the weights for my umbrella. Filled with water and the weights, the umbrella can be held. The connecting rods that hold the weights together are hard to keep in, that's my only complaint. Costing $85 way too much. I will be happy if I can get a few years out of it. You don't want to leave the water in there year round as expansion and subtracting can crack the plastic and so you should empty the water in the fall.
👤It is easy to use and does the job. It fits perfectly on the ABBA 11 foot umbrella, though it is a tad larger than the one they use.
👤Terrible! There is a hole in one of them. Can't use or get anyone on the phone at Amazon.
👤This was bought for a patio shade. The shade has a pedal in it's base that can be turned. There were no problems with the pedal being fully depressing. Works well. Sturdy thick plastic is easy to fill. Heavy duty pins fit well. It took five bags of sand to fill the weights. Use dry sand to fill the containers. We spread the sand out on the driveway in the sun for 15 minutes because it was moist at our store. We just shoveled the sand in after taping a plastic milk bottle with the bottom cut off. It took a few minutes to fill each one. It was easy peasey. If you really hate yourself, do not try this with wet sand. You will want to stab yourself in the eye after five minutes of ringing wet sand through a 1” hole. Don't be a Gumby.
👤These things are very expensive. I didn't think it would pop when put in water. Put water in it not even halfway full and it exploded! There are 3 big hands. It's a pain in the butt when I need it to hold my umbrella stand. I'm going to fill it with sand and patch it up.
Best umbrella base products from Us Weight. In this article about best umbrella base you can see why people choose the product. Purple Leaf and Abba Patio are also good brands to look for when you are finding best umbrella base.
Us Weight, Purple Leaf and Abba Patio are some of the best brands that chosen by people for best umbrella base. Find the detail in this article. Purple Leaf, Eliteshade and Home Zone Living are also brands that their products are worth to check.