Best Best Office Chair for Lower Back Pain Fixed Arm

Pain 30 Sep 2022 10+ Comments Open

1. Serta Health Wellness Executive Office

Serta Health Wellness Executive Office

The desk chair is professional and comfortable. The air lumbar technology. When you move to provide back support, the cushions pivot. Executive style. The leather has contrast stitching. The frame is made of wood. All day long. Convenient height and tilt adjustments can be made with seat-side cable-actuated levers. It's easy to move around with multi-surface, dual-wheel designer casters. It's easy to move around with multi-surface, dual-wheel designer casters.

Brand: Serta

👤I ordered this one because of an upper back problem. I ordered the real Serta because my coworker has it. The chair is comfortable. The real Serta was perfect for my neck, so I ordered it for neck support. I compared it to a coworker's chair. This chair doesn't say Serta. The instructions do not say Serta. It is completely different. I bought the real thing after selling it to someone.

👤The product failed 6 months after purchase. I would not use this chair. I think this chair is better for shorter people, but I still found it comfortable. My last office chair lasted for several years, so I am not hard on these things. I like to sit in my chair. The arm rest is designed to lean back, but it fractured in one area and was showing a stressFracture in another area. If you like to lean back, I would not seat you in this chair. The plastic is cheap and weak. The arm rest is on back order. This isn't an isolated incident.

👤The Serta chair is a light grey Bonded Leather/Mesh Air Executive Chair with a full name on it. I don't see many chairs in this style. It was the same as the rest of my PC/desk setup. The seat is comfortable. Lumbar support is good. It makes me sit straight. The casters were easy to put in. I had to use force with two of them. They roll on the carpet. The paint of the armrests is easy to scratch. I scratched it while installing it. The black plastic caps don't fit well. The plastic inserts don't fit well. It makes the chair look cheap. I will provide images. It's not noticeable from a distance. My feet are not able to touch the ground at the lowest setting. It is to be expected. The back is a little high for me. I prefer a couple inches shorter so that I can tilt my head back to rest rather than getting blocked by the seat. I should have realized that I should look into "mid-back chairs". The top area is too firm. I like it to be squishy. Another reviewer said to remove foam or cardboard behind the head and shoulder. It is said that the last step is assembly. If you come across any issues, you should contact True Innovations. I will give you images.

👤I was hoping to get a Serta brand chair, but it doesn't look like a picture or video, and I am disappointed. The leather and cloth parts were damaged and the metal parts were not fastened properly. The product had a very stinky smell and was poorly made and lacking in quality. Sad! I will be returning the product.

👤I noticed that the name "Serta" wasn't on the chair when I received it. Not in the manual. The manual has a number that is not Serta. I took it a step further. I called Serta. They sent me to a company that makes chairs that Serta puts their name on. Serta makes mattresses not chairs. I called the True Innovations number and went to their website. The site has nice chairs, but this model is not pictured. I was on hold for 44 minutes and when I got to 1 it hung up on me. I'm done. I don't trust chairs. I sat on it and the chair collapsed under my weight. The seat is filled with air. It is very hard and smooshes down. Going back. You can skip this listing.

2. ZLHECTO Ergonomic Adjustable Computer Conference

ZLHECTO Ergonomic Adjustable Computer Conference

Installation tools and instructions are in a carton and can be installed in 20 minutes. If the chair has quality problems, please contact them, they will give you a 3-year warranty and replace the damaged accessories for free. After 100,000 experiments, the seat surface is durable for 10 years, and the rotation isdurable for 10 years. An extra 4 cm heightened backrest, extra thick cushions and a thickened explosion-proof seat plate give you more comfort and double coverage. The ZLHECTO office chair uses cotton material which responds to your body's unique features. By perfectly supporting your weight, size, and even temperature, it will help you feel more comfortable in jobs that require extended sitting. The chair has a mesh back that allows air to flow. The mesh task chair is built with easy adjustments for tailored comfort. The armrest and back support enhance ergonomics. The computer chair can support up to 300 pounds over eight hours of continuous use. The rolling casters make it easy to move across the floor. It is suitable for any floor. They guarantee their customers 100% satisfaction with their desk chair. If you don't like the chair, you can email them and get a replacement or a full refund. It's better to MzE than MzE. Order it now and it will be free. ADD TO CART Right now!

Brand: Anacci

👤I had a list of features I wanted in a new chair. 1. My previous faux leather chair was brittle and left a mess around my floor. It's harder to find this when you want the arm rests to have it. 2. I like to sit cross-legged in my chair and have room to do so because of the arm rests. I don't want to be pinched on the edges of the seat cushion, so it had plastic on the sides. High back. I like the neck freedom while I sit. 5. The recline can be locked. One of the few that fit all the boxes was the lower back support chair. I contacted the company directly because the chair wasn't listed in black on Amazon. I was able to still purchase through Amazon because of their support. The only complaint I have with this chair is that the armrest padding isn't super thick. If I dig my elbow into it while leaning for a long period of time, it's usually not a sign of this, but the padding is adequate. The features and quality are great in this price range and I would buy again.

👤I love this chair. For a number of reasons. 1. No tools were needed other than the allen wrench that was provided. 2. Sturdy and comfortable! The seat cushion is very comfortable. The support for the back is strong. 3. Excellent customer service. I need some extra support since I'm just a little too short, so I ordered the free pillow. I was offered a credit for the pillows that were out. I could buy one. The purple chair I purchased at Staples a few months ago was not as good as the ZLHECTO ergonomics desk chair. I'm very happy with my purchase, and I highly recommend this seller.

👤The chair is good for my issues. I need to sit upright with good back support. I like the fact that the seat isn't too wide and cumbersome, and that the back support is adjusted to fit my body type. This chair does not make me feel like I'm falling forward because my knees are a little lower than my hips. It was one reason I ordered it, and thanks to the other reviewer who griped about that feature. The flip-up arm rests allow me to pull it up close to the table, but also put them down to watch TV. I can raise my body up off the seat by pressing down on the armrests, which will open up my spine. I needed the seat to raise at least 20 inches, and some other chairs don't. The only complaint I have so far is that crumbs and hair get caught in the seat webbing material. It's wobbly where the seat connects to the post, like most office chairs.

👤The chair is not comfortable. I am tall and the support didn't meet my needs. The support is made of plastic and slides behind the mesh. It's pretty uncomfortable because it isn't cushion. The back of the chair is too far back for my taste and it isn't adjusted. I feel like I am sitting down rather than standing up. They were out when I requested one, but they gave me a booklet with information about their guarantee, which included a free back support pillow for those that need it. I bet I can figure it out. Customer service was great. I returned the chair because they offered to give me an allowance to purchase a different pillow, but I didn't. I will probably donate the chair because they didn't want me to return it. I'm not sure it will work for me.

3. Ergonomic Computer Office Midback Chair

Ergonomic Computer Office Midback Chair

It is built for comfort. The chair is made of mesh for long- lasting comfort. The locking mechanism keeps the back upright and relieves the stress and pain of other office chairs. Users have full mobility whether they are working on the computer, or meeting in the office, thanks to the ergonomics design. Their chairs pass all components of the BIFIMA certification and are a reliable option for users weighing up to 250 pounds. Their chair is easy to assemble with all the necessary tools. In about 10 minutes, you will be set up and ready to play, with step-by-step instructions. They want their customers to feel comfortable on the day and that's why they have a customer guarantee. If you are not satisfied with the chair, please contact Best Office customer service.

Brand: Bestoffice

👤I noticed that the chair had a warning underneath it. Why are they allowed to sell this? Wtf.

👤It's not built to last. It has not lasted a year. I weigh only 153 lbs. Look at the photos I posted. The metal cracked.

👤The chair is comfortable. It's easy to assemble with the included allen wrench and spare screws. The chair is very strong once assembled. It rolls and spins. For a more in-depth review, watch the video.

👤There are pros and cons. Easy to assemble CONS: price, shipping, and easy to assemble. I purchased this product over the weekend and it arrived within a few days. Shipping expectations were met. All parts and hardware were clearly labeled when I opened the box. Building a chair is easy. The screws are of different lengths, so be sure to pay attention. I looked at the chair after completing instruction. The chair frame itself was shown to be blemished, faded, and stressed in the photos that accompany the review. There were exposed edges. I was worried that I had missed a step when I first sat in the chair. It was very weak and weak from side to side. I ran through the instructions again and checked all the screws. The chair still feels uneasy to sit in. There is a lot of movement in the seat bolster and you can feel it on the floor. If I sit still and tun my head, the chair tilts to that side. The support for the back is not very good. It seems a bit lacking. The armrests are useless. I stand 6' tall and sitting straight up, my arms are not able to make contact with the arms at all. They are too short for me. If you don't sit with your knees touching, your thighs will push against the fixed arms, causing more pain. If you're looking for a comfortable and supportive chair that you can work in throughout the day, I can't recommend this chair.

👤The armrest broke in half after 1 month. Be careful with this chair. Not as strong as I thought. I heard a loud pop while I was in it.

👤I received a unit that deserved negative stars. I have to give it a 1 star because there is no rating. I never advanced to the next stage of assembly as I could not attach the wheels in any way that they wouldn't fall off when the base was turned right side up. This shows that the manufacturing quality is poor. The chair is not made in the USA according to someone who answered a question. The box is labeled "Made in China". This is not the chair for those who want to avoid Chinese products.

👤If you have never built a chair before, this review might help you out. The little marks are normal and probably from the factory. Pros- The parts came with nothing broken and the screws were not stripped. Each part had packaging on it to make sure it was protected. The instructions were useful in telling you what to do. See the cons. The chair is not as stable as you think, but it has instructions to not stand on it. It was a little too high for me, but it gave you enough height for any type of office desk. I was surprised how light it was. The wooden floor makes it easy to move the wheels around. There is a A lot of support on your back is easy. The instructions for step 2 will make it difficult for any beginner, I recommend putting the armrests on the back first to get rid of any future problems, since the holes are easier to move around. Armrests are very low for someone around 6 feet tall. At least they gave you a tool. This chair is great for the price and has no defects in its design. I feel more support on one side than the other, but it might be my fault. This feels good for a big guy under 250 lbs. The chair did not last 3 months. Cheap materials.

4. SAMOFU Ergonomic Backrest Adjustable Executive

SAMOFU Ergonomic Backrest Adjustable Executive

We provide a 5-year warranty. The office desk chair has all the parts and tools required for installation. If you have a problem with your use, please contact them and they will provide you with a solution in 24 hours. Load up to 300 lbs. with the big and tall ergonomics chair. The large office chair is recommended for heavy people. The height from the cushion to the headrest is the lowest for tall men and the highest for taller people. The seat is 4” tall and can be adjusted to fit your desk size. It has independent 4D lumbar support to accurately fit the natural curve of your spine and relieve back pain. The backrest can be used to tilt and lock. The most comfortable position for your neck is provided by the multi-dimensional free rotating headrest. The seat goes up and down, lifting the armrest for the ultimate in comfort in the office or game. SAMOFU mesh office chair with a waterfall-edged seat has a slightly sloped downward shape that helps to relieve pressure and increase support behind your knees and on the back of your thighs. The elastic mesh seat hugs your buttocks. The body can be kept cool and dry, and will not make it harder for the blood to flow. Rolling easily and freely is good for hardwood. All office chairs should have a mechanism to allow easy access to parts of the desk. Arm fatigue can be caused by over extending. The silent wheel will not be loud when you focus on work. It can be applied to wood floors, carpets and other surfaces. Few sellers like them provide a warranty period. All customers will be covered for any needed repairs and replacements for free during the 5 year warranty. Including but not limited to missing parts, damaged packages, or failed function. No more questions, no answers!

Brand: Samofu

👤I am very happy for a sub $300 chair. I researched for hours and this one just checked all of the boxes for me. I need something that can hold up over time. After using this for over a month, I can say that the positive comments and reviews are correct. This chair has support and flexibility. The looks are great. My mom sat in it and now she wants one as well. I purchased protection from Amazon and the company quickly removed it from my order and told me that they have a 5 year warranty on their product. Other companies need to pay attention. This is how you do business. Would definitely recommend. No question, 5 stars.

👤I didn't like the chair because it didn't fit my body correctly. I threw out the box because I was upset. I thought I was stuck with the chair. Customer service reached out to make sure I was happy with the purchase and it was the best customer service I have ever received from Amazon. I would recommend it because of their wonderful service. I weigh 140 lbs. The back did not hit in the right spot for me. It is probably perfect if you are 5'8" or taller. The headrest can also be removed.

👤I have been looking for an office chair since I started working from home. I needed the chair to be comfortable enough for me to sit for 8 hours a day, and I wanted a head rest. I tried several chairs in the $200 to $400 range, but none of them worked out. Some hurt my back, some were not high enough in terms of height, some had an unstable headrest, and some of them didn't have good support. I have found the ideal chair after using it for 30 days. The lifting backrest is very useful. My head is resting on a natural resting position and the head rest is nicely positioned outside. The arm rest height adjustment is a bonus. It is comfortable for long hours of work. The construction of the chair seems strong. None of the chairs offer warranty for that long, but the manufacturer does offer a 5 years warranty. Very pleased with the purchase.

👤I bought this for my boyfriend, who is about 300 lbs. This chair is the best one we have found so far, and he is a pretty thick boy. It is almost too small to fit him, but it works perfectly. It took us a long time to figure out how to adjust it in the back and neck, but we got it. This chair is a steal and it is great. I would buy this chair a million times again. It took 20 minutes to set up, they provided extra screws just incase, and we got a screwdriver and allen wrench. The mesh makes it so he doesn't get sweaty while gamering. The chair is perfect.

👤The chair is very comfortable and good quality. I had been looking for a good chair for my home office and I was happy to find this one. I have been using this for a week. It provides good support for your neck and back. The chair is easy to assemble and can be adjusted as per your comfort level. The seat cushion is comfortable, the mesh build is perfect, and the support is very good. Highly recommended. It's a great value for your money.

5. Office Star Synchro Support Managers

Office Star Synchro Support Managers

Breathable mesh seat with one-touch pneumatic seat height adjustment. It is required to meet the standards of either theANSI or theBIFMA. You can tilt at a 2:1 ratio for better circulation. The natural curve of your spine is enhanced by the lumbard. The flip arms have heavy duty silver accents. Greenguard is certified for better indoor quality. It is manufactured with reduced harsh chemicals and processes that are low in volatile organic compounds. The weight capacity is 250 lbs.

Brand: Space Seating

👤The title of the review is due to the fact that I am currently writing this review on February 14th. The review is out of the way. I had a chair for a while. I was very happy with it. I found it easy to put together, comfortable and provide better back support than my previous chair. Everything was going well until tonight. I sat in my chair after getting a drink of water at the office. The room went sideways as soon as I sat, and I thought about two things. I was thrown on to the floor by the chair that slipped out from under me. The back of the chair snapped off as I looked down. There are brass posts if you look at the pics. The brass posts used to be inside the back of the chair. This is where the chair base is located. The brass posts snapped out of their holes when I leaned back into my seat. I am okay, and Amazon Customer Service was great in issuing a return slip. The rep was worried about my health. I would only recommend the purchase of this chair to my enemies or people who like to flirt with danger. Don't buy!

👤It was a big failure. I almost died when this chair collapsed on me. The bolts that attach the seat back had detached from the hard plastic frame. The chair was assembled correctly. After only 30 minutes of use, the failure happened. I'm an average adult. This kind of failure could happen to anyone. The chair's arms are not attached to the base, which puts stress on the joint.

👤After 2 years of use, I have a few pro's and con's. I weigh 220 lbs. I use my chair for 16 hours a day for work and 16 hours a day for gaming. That's the truth, but it sounds excessive in black and white. It looks nice. The dual mesh reminds me of the Aeron. It was a reasonable priced. Poor man's Aeron is what I saw. There are two more Out of the box supportive. I have never had back problems. There are pros and cons. The seat pan mesh is starting to stretch. I was worried about the mesh stretching as it supports my 220 lbs for 8-16 hours a day. It's not as tight as it was when I bought it. I'm sitting down. The back of my thighs are starting to feel the pressure from the front lip. If you wear thin clothing like pajamas, the mesh seat can start hurting. It's not an issue with thicker pants. I have never tried it without clothes, but I would assume it would hurt more. It's unacceptable to have pain while sitting. There are two more I have to be careful not to move too much when talking to clients and co-workers on a Webex because the Chair is terrible. It's also driving me crazy. I'm going to try lubrication to see if it helps. I've never had a chair that loud. There are 3 more One leg of the base was snapped off. They aren't attached that tightly either, that's more my fault. If you're 200 lbs and looking for a sitter for 2 years, this may be the chair for you. You should be prepared to replace it once it wears down. I replaced it with a Steelcase Leap V2. My daughter's computer chair is now this.

6. Serta Essentials Ergonomic Low Back Computer

Serta Essentials Ergonomic Low Back Computer

There is no seat like a seat. The Serta Essential Computer Chair is made of faux leather and mesh. It's easy to tuck this office chair under a desk or table. An exceptional air flow is designed with a mesh back to keep you comfortable. You can find your ideal position with the seat-height adjustment lever. Casters for easy mobility. Casters for easy mobility.

Brand: Serta

👤I got four stitches in my right leg because of this chair. When I sat on it yesterday, it ripped my skin apart, because it popped out of the leather and I didn't notice. I've always felt like I couldn't get through the fabric, but I guess it finally detached from something inside and ripped the fabric open.

👤I was looking forward to sitting in the chair. I ordered it over two months ago and it arrived today. It took 15 minutes to assemble. It was very disappointing to see how low the back of the chair was. I'm only 5'8" and it's too short for me. The chair is easy to put together and it is comfortable since the cushion is comfortable. The chair feels on my back and I am very disappointed. My girlfriend is 5'4 and she agrees that the back support needs to be extended. Unless you are a shorter person, I wouldn't recommend purchasing.

👤I need a chair that is more attractive than the average black office chair because my computer is on display in my living room. The chair is very comfortable and it is a pretty cream color that goes well with the colors in the room. I dropped one star because I would have liked it to go higher. I prefer to sit high on computer chairs and it wouldn't bother anyone else. It was a good choice for me, and I had it for about two months.

👤I have three chairs, two of which are blue and low back. My 13 YO and 9 YO use the other two, I use one. They are easy to assemble, very comfortable, and in my case, fit well with my additional support pad. It is easy to raise and lower the seat. For the first few weeks, I didn't have a floor protector and didn't notice that it did not damage my carpet, but I put one in for ease of rolling and out of caution. The chair was very supportive when I had knee pain and sat for the duration of my day, but I didn't have the lower back pain that I'd previously had with the more decorative chair.

👤I don't like office chairs that work well for me. I guess I was taken by the name, because when I found this...well, I guess I was taken by the name. I thought it would be comfortable and I would be able to sit back and save my back. The seat makes you feel like you are sitting on a piece of hardware. The mesh back makes you feel like you are leaning into the hardware. Is it possible to see the theme here? I almost tipped over twice when I tried to roll back too hard. It's great for comedy, but not for my patience. Give this one a solid pass and do yourself a $100 favor. I wish I had.

👤I was not happy with this chair. I ordered the one with no arms because of its claims of comfort, its color and its lack of arms. The chair is nice. It is very uncomfortable. I think the one I bought is malfunctioning. It is downward. I am sitting on the floor. The chair is small. I fit in because I am midsized. A large person wouldn't fit in this chair. I am returning the chair that I purchased. I'm so thankful that I did. I can't disassemble the base, which makes it impossible to fit in the original packaging. Amazon's customer service has been great. I will be purchasing a chair through this site.

7. Posture Ergonomic FlipAdjust Armrests Executive

Posture Ergonomic FlipAdjust Armrests Executive

It is easy to exaggerate. The office chair has all the parts you need. You can finish assembling by following the instructions. The video instruction is provided by them. The BossleVEL ERgoNOMICS are. Is it an executive chair or an ergonomics powerhouse? Why should you have to choose? It is all that you decide with its Click5 Lumbar Support, FlipAdjust Armrests, PU-Leather Fabric, and Classic colors. Different moods and different days need different chairs. 5-Stages of Lumbar Support are provided by the +Posture modern ergonomics chair. They call it Click5 because each level clicks into place so that you will feel better every day. You can create a rocking sensation with either TiltRock or TiltLock. You can make a task chair with no arms or somewhere in between with the FlipAdjust Armrests. It is a rolling chair with space saving qualities. Strong construction and curved padded armrests add to the comfort. The chair has a heavy duty nylon wheel base reinforced with ribs and gussets. The Class-4 Gas Lift has a seat-to-floor range of 18.7 to 22.4 inches. The hip space you have is 19.3in. The max capacity is 275 lbs. You can choose between Taupe or Black. It is easy to exaggerate. The +Posture is easy to put together and weighs a strong 40.8 lbs. A chair that moves and looks right. So you can size your workspace.

Brand: Nouhaus

👤I hunted and searched. I work at home, but I always did. I paint at the other end of my desk. I can log hours in a chair. I wanted comfort and good support, but also a good aesthetic. The last desk chair I bought was beautiful, but turned out to be a torture device. I received it quickly. It arrived a few days after it was ordered. My husband is out of town when it arrives, but I am not a patient person. So my 11 year old. I decided to try and put it together after we brought it in. I was worried because the thing was heavy and many reviewers said assembly was hard. I'm happy to say that for us, it seemed pretty standard issue desk chair assembly, the only issue being that we initially put a part on backwards and had to correct it. That is just my spacey self and my I'm-not-sure-he-has-ears kid trying to work together. We are ready to try her out, it seems all the parts are in their appropriate places. The raising and lowering mechanism works well and the wheels roll on my tile floors. The pop out back support is a technical term. It's perfect at about 2 clicks. I am very happy with this chair.

👤I have been sitting in this chair for two months and would not recommend it. The feature for supporting the back is too low and silly to use. The seat tilts forward and becomes very uncomfortable after an hour or so. My back and legs are sore by the end of the day, because I am constantly adjusting myself. I have always worked a desk job, so this is definitely a chair issue. The instructions for this chair were very vague. Make sure to have a partner with you. The arms and legs are made of cheap painted silver plastic material, but the seat fabric is very comfortable and appears good quality. The arms should be adjusted for this price. They sit very high for me. They sit in a mid rib cage. You can find a nicer chair for $200.

👤1. Shipping is fast with good packaging. 2. Premium, soft, but supportable. 3. Installation is easy and quick. Two people are going to be fast. 4. 5 levels of support, height adjustment, and flip armrests are included. 5. The max weight capacity is 6. You will get a 5 year warranty.

👤I'm large, 6' 0" and 300 lbs. The price, width of seat, and lack of supports under the arms made me pick this chair. I've been working from home for the past year and I've been sitting in this chair a lot since I bought it. Sometimes I wish it had more padding on the seat, but a seat cushion will fix that. I don't have a problem with being too wide for the chair or rubbing my legs on the arms. The strength of the arms is surprising to me. I had a knee replacement just before I bought the chair, so I am dealing with two sore knees. When I get up from the chair, I put my full weight on the chair arms to stand. I've been surprised that I haven't seen the arms give out because of the pressure I put on them. I think about it when I stand up. I don't think they are getting weakened by my abuse.

8. KERDOM Ergonomic Breathable Computer Adjustable

KERDOM Ergonomic Breathable Computer Adjustable

The task chair is easy to install. It can be done in a few minutes. The chair has appropriate waist support and 3 support points. The height of the seat can be adjusted. Even if lying down will not fall, it has strong stability. The cushion and back are Breathable. A high-quality mesh is used to make it. May you have a pleasant experience. You can put the chair under the desk to save space. The home desk chair can be placed in a small area. It can be placed in your living room, meeting room,study room, office. There is a video in the manual and related video section. You can install it yourself. A professional after-sales service team is ready to provide satisfactory solutions if you have a question.

Brand: Kerdom

👤The desk chair has a flat wood under the foam that makes it more uncomfortable than the seat foam. I found a piece of inch and a half polystyrene foam, traced the seat around for size, and cut it with a saw. I placed the extra cushion over the desk chair seat to make it easier to sit on the chair for extended periods of time. I'm thinking about getting some fabric, removing the seat foam, placing some foam under it, stretching the fabric over it, and then stipulating it to the underside, but haven't done that yet. The interim cure is working so far. The foam I found was black, so it looked almost the same. I think an inch is enough. If you're not familiar with polystyrene foam, it's harder than soft foam found in seat cushions, but the top compress. The thing is, due to the added firmness, you don't sink to the bottom.

👤It was easy to put together. It feels sturdy but not very sturdy. I would go with a more expensive option if you are rough on chairs. I wouldn't buy if you're heavy and lean back a lot. A coworker was 300 lbs and leaned back a lot. She would destroy chairs at work. I don't think this is a good investment for someone like that. This is a good value if you want a chair that will support your back. I lean back in the chair occasionally but am careful not to over use it. The armrests lift up and I like that. The chair can be slid under my desk to be flush against the edge. Sometimes, I lift an arm to pet my dog. It's nice. The chair is easy to sit in. I use a spray for my car's interior to keep it looking good, and I use a Silicone lubricant for moving parts. The seat is easy to clean. The chair cushion will hold up over time. It is fine right now. It is a decent chair.

👤I have seen a lot of good reviews on it. I am a well built male. This chair isn't for you if you describe it the same way. I bought this for a good gaming chair when I have time to play. It was bought on the 9th and came in on the 11th. On the 11th, the building was built and on the 12th, the building was disassembled. So uncomfy. It felt like my back was in a knot when I woke up. When leaning back. The shoulders are too Broad with the arm resting up. Hard foam to sit on.

👤The welding on the bottom of the chair that connects the base portion to the seat completely broke. The chair is useless because the seat is wobbling. You can see how the weld is sunken in the photo. The company replaced our chair for free. Very responsive. My rating was upgraded to reflect good customer service.

👤I spent a long time looking for a chair that would be comfortable for an 8 hour day, but that wouldn't break the bank. The chair is it. It only took me 15 minutes to assemble it on my own after it arrived early. The mesh makes it so your back doesn't heat up, and it also makes it a stylish edition to any home office. It is the right amount of padding that makes it perfect for an 8 hour shift. It allows for you to lean back. The arms can flip up, making it more versatile, no matter your desk size or height. If you are looking for an office chair that won't break the bank, then this is the one for you. This is the chair for you.

9. Hbada Ergonomic Computer Support Flip Up

Hbada Ergonomic Computer Support Flip Up

The mid-back desk chair is simple and elegant. Match different styles. Space saving flip-up arms for different situations. You can put it under your desk when it's empty. You can adjust the chair height to fit your sitting position. Push in to lock in an upright position. The heavy duty base has smooth and silenced rolling caster. The heavy duty base has smooth and silenced rolling caster.

Brand: Hbada

👤The arm rest padding is not smooth and the seat is not thin after only a few weeks of use. I'm not doing anything other than sitting in the chair as it creaks when I lean back. The quality and durability of the assembly were not good. You would expect this to last for a couple of years before the materials start to degrade. I will be getting a refund. I received a letter in the mail today from Hbada telling me I would receive a $25 Amazon gift card for writing a 5 star review, which may explain the number of high reviews this chair has gotten. I don't know how common this is on Amazon in general, but it completely defeats the purpose of reviews.

👤Have had the chair for a week and have used it for 8 hours each day. The chair is not the best, but it is not the worst. I like the chair. Can't complain much at this price point. I was worried that the materials would be cheap, but they are sturdy. If you sit correctly, it is comfortable. The seat cushion is not great unless you sit properly at all times. If you sit on your legs. If you sit near the middle or front end of the chair and you have tailbone pain, you will probably get it with this chair. Within an hour of use, the foam is already damaged and does not fully return to its original form. After a few days, I can feel the seat being hard to sit on. It is definitely permanent now. I bought a seat cushion to help with this issue. I'm 150 lbs, 5'10". The seat cushion is thick and you can feel it. It worked perfectly when I first used it. The nut holding the arm in place can get loose if you move the arm up and down frequently. This happen more with one side than the other. The issue was fixed temporarily when the arm was taken off and the nut tightened. After moving the arm a few times, the nut got loose again and the arm fell down. I have found a fix that worked for me if you are having this issue. You can find a pack of flat washers and locking washers at your local hardware store. The washer should be no bigger than 7 inches. The washer's internal diameter should be at least 1/62”. Remove the arm from the chair. Place a locking washer on top of the existing flat washer to keep it in place. Place the nut on the hand. The order should be Flat Washer, Locking Washer, Flat Washer, and the nut on the arm's through-bolt. I am able to move the arm repeatedly without it getting loose or wobbly. The manufacturer is aware of the issue and is fixing it. If you find that my fix isn't working, please contact them. The arm is solid after my issue was fixed. The plastic used to make the chair limits the mechanism that allows the arm to move. I wouldn't put my entire weight on the arm because the plastic is solid. Maybe it can support it. I do not want to risk it. There isn't much to complain about for me. It is comfortable when you have your back against it. I didn't notice anything that stood out to me. I don't feel the support at the back. This chair might not be the best for you. Within a week of use, I haven't had an issue with it. When you sit on the chair, it will slightly compress, but nothing significant. I know that I won't see an issue until later on. I will try to update this after more use. I contacted Customer Support before fixing the arm and they responded quickly. I was very pleased with the professional way in which he made sure my issue was resolved. If you have an issue with your chair, I will contact them to see how they can help. Is it a good idea to purchase it again at this price point? Yes. The 6 month review has been perfect since the arm was fixed. No issues with it, no wiggle, and not to lose. That was one of the things I was worried about. The chairs I bought ended up wiggling a lot and couldn't hold up anymore. This one has not had this issue yet. The cylinder still works. When reclining back and forth, there is no squeaks. Still happy with this chair! I would still recommend it. The 8 month update shows typical usage. When you rock back and forth, the chair makes a bit of noise. The back mesh is not too loose now. The fluids are still performing as before.

10. FelixKing Ergonomic Adjustable Computer Breathable

FelixKing Ergonomic Adjustable Computer Breathable

The mesh office chair is easy to assemble. You can assemble in 10 minutes if you refer to the clear instructions. The height of the chair can be adjusted according to the height of the desk and the height of the person sitting on it. It also has a rotation. It can reduce your body's pressure with the 30 degrees of recline and structure of distributing the pressure-resistant. Promote your own circulation. A caster can be moved. The surface of FelixKing's chair is made of high density natural sponge which is designed for the curve of human's butt. It can help reduce body pain. Thick handrails and mesh materials provide comfort for people. It can protect your back and spine. The mesh back of FelixKing's chair is suitable for the waist and back curve. The S-shaped curve design on this chair is modern. It is easier to relax. If you sit for a long time, you won't get tired. Lift the armrest and it can be placed under the desk. It can be neatly stored. The armrest can be moved 90 degrees to relax the muscles and have fun at the same time. It can be used in living room, study room, meeting room and office. It can be assembled with the simple tools that come with packing. You can complete it in about 15 minutes. The warranty is for a year. If you have a problem, please contact them at any time and they will provide you with a solution.

Brand: Felixking

👤The reviews made me want to buy this chair. I knew that I was getting a good support based on all of the reviews. Please trust me when I say to save your money. The chair is very uncomfortable. I figured it was going to be a flop when I pulled out the instructions and the card said "Give us a 5 star review and we will send you $20 through PayPal". If you keep your money, you can find a chair that isn't paying for reviews. This is not the chair for a person with a lot of derriere.

👤I saw a review that said it was a nice chair, even though it had a short seat. I assumed this wouldn't be a problem for me at 5'2". I was wrong. It looked like a good deal for the money. I wouldn't pay $50 for it after assembling. The seat is a joke and the back rest is comfortable. I feel like I'll fall into the floor at any moment. I feel like I have to sit at 90 degrees. I feel like I'm sitting on the edge because I'm not reclining. The back rest is too much for my comfort, and in my opinion, it is best to pass up, and look for something better for the price point.

👤The chair checks the boxes. My home office is in the middle of the house. Sometimes I end up choosing form over function. I sat in a chair that was not super comfortable for 2 years. I didn't want a traditional black office chair, but I did want to spend a bit more. The chair is comfortable, supportive, and I really like that the arms flip up so it can fit in my desk. It was easy to put together. It took about 30 minutes. I'm kind of stupid so it could be quicker. It feels strong. I had my husband tighten the screws and it was solid.

👤If you give a 5 star review, there's a $20 gift card offer in the packaging, which makes it even harder to order a chair online. If you are a big girl, you won't fit in this chair. The curve of the seat back makes it difficult to get to the back of the seat. You're still going to feel like you're sitting on a bar stool if you wedge your butt into the space between the seat and the back support. I'm short. My legs are long. The seat only reached the middle of my thighs. The armrests were on my hips. I'm fat, they make chairs for fat people, but on here there are a lot of people who say it's great for bigger people, if they have no junk in their trunk and it fits them. The seat is flimsy and not stable, and the recline lock allows quite a bit of lean. You should walk by this chair if Sir Mix-A-Lot sees you when you walk by. I'm going to do that, I'll go to an actual store and sit in chairs to find a fit for my big butt.

11. HON Ignition Mid Back Adjustable Lumbar

HON Ignition Mid Back Adjustable Lumbar

The seat back of the 4-way stretch mat is Breathable. The office chair has a seat cushion that is designed to give workstation warriors all-day comfort. Long workdays provide lasting comfort with the LUMBAR SUPPORT in this office chair. Adaptable arms have height and width adjustments to give you the comfort you need. You can have fully tailored control of your comfort thanks to endocannabinoid features like synchro-tilt mechanism, upright tilt lock, tension control, and pneumatic seat height adjustment. The computer chair has a five-star base that is molded from reinforced resin and has a 360-degree swivel that allows for freedom of movement in any direction. The chair has a 300 lbs weight capacity.

Brand: Hon

👤I am returning the chair today since I still need to buy a chair, but I thought I would spend an hour or so in it. I know what to look for, but I couldn't make it 20 minutes in this thing. You could find oil paintings of this chair from a medieval dungeon. I found myself lurching forward without any back support. The support for the lower back is a joke. I thought the chair had a few design flaws, but the whole thing needs to be scrapped. How can you make a chair that is so bad? How are you doing in business? Is it because so many people return these heaps that you have to keep overpricing them to stay in business? If you are going to try this chair, be sure to keep a bottle of Advil on your desk because it is fairly comfortable. There are some design issues. The height adjustment doesn't lower far enough and neither does the lumbar system. The amount of support depends on the height at which it is adjusted. The height adjustment of the arms takes more time than it should and the action feels cheap and rigid. HON is the biggest problem with this chair. Thank you for the multiple pictures and musically scored video, but how about the dimensions? I had to go to HON's website to find the chair dimensions, but they couldn't even tell me the back of the chair's dimensions. The chairs are listed as "mid back" or "high back", but they don't give dimensions for the back. I couldn't find any information on the actual height of the back of the chair, they are known primarily as an office chair company, they have numerous models, designs, etc and I couldn't find any information on the actual height of the back of the chair. The back of the chair is not tall enough. This has resulted in a huge waste of time, as I would not have ordered this model. I don't know what I'm getting so I'm not ordering any more HON chairs. They don't show pics of a model in a chair with a height and weight reference. How hard is it to make a measurement? This chair is a huge disappointment.

👤My mom always said I'm not good at many things, but I am good at sitting. I consider myself to be a chair enthusiast and am a bit of an expert in the subject. A seat that is very good. A boss. Let me be your sedentary friend and share with you my thoughts on this chair from HON. There are pros and cons. The stretchy backrest helps you avoid nasty back sweat. The added structure for your lower back could be better. I added an extra memory foam cushion for added comfort, but the foam seat bottom is still comfortable for those of us not gifted in the area. The seat can be locked into position, the recline tension can be locked into position, the armrest height can be adjusted, and the back angle can be adjusted. Casters are easy to move around with. Changing the caster out to urethane rollerblade wheels is not included, so you may want to consider a rug or mat to protect hard flooring. The materials and design are attractive and can be used at home or work. It is easy to clean and should age well, but be careful with sharp objects around the mesh seatback material. Time will tell if the foam seat cushion will flatten or if the stretchy mesh will lose its springiness. The chair designs that HON so blatantly borrows from are a bit pricey. There are pieces in the box that can damage the mesh seat back or the plastic pieces. I added a foam cushion between the mesh back and the lumbar support for added support. Plastic legs have been found to snap according to online reviews. Be aware of the weight limit. I have not had any issues of my own. The first chair I received had a portion of the mesh on the seat back damaged, but there was no visible damage to the plastic in which the seat back was enclosed. The damage was likely there when the chair was packaged. I had to send the original one back and have a new one shipped to me because I couldn't get a replacement back. This was not an additional cost to me, but it took another week. If you're looking for a smart alternative to the Herman Miller Aeron chair that won't require you to get a second mortgage on your house, then definitely give the HON Ignition 2.0 a look. There are cheaper options out there, but for me, this chair struck a good balance between design, material quality, and price. You can try out the fit and feel for yourself with Amazon's return policy. Make sure you check the quality of the parts before you start assembling the chair.


What is the best product for best office chair for lower back pain fixed arm?

Best office chair for lower back pain fixed arm products from Serta. In this article about best office chair for lower back pain fixed arm you can see why people choose the product. Anacci and Bestoffice are also good brands to look for when you are finding best office chair for lower back pain fixed arm.

What are the best brands for best office chair for lower back pain fixed arm?

Serta, Anacci and Bestoffice are some of the best brands that chosen by people for best office chair for lower back pain fixed arm. Find the detail in this article. Samofu, Space Seating and Nouhaus are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to