It is easy to assemble and the detailed instructions and tools are included in the package. They will respond to you in 24 hours if you contact them. The executive chair is comfortable and made of black leather. All day comfort and support is provided by a padded seat, back and armrests. The seat height adjustment is pneumatic. The measures are 29.13 by 25.59 by 41.34 to 45.08 inches. The maximum weight capacity is 275 pounds.
👤After my wife's old chair failed, we bought a new one. The chair was well packed and had minimal waste. The manual was easy to understand. I was able to put the chair together in 15 minutes. It is very comfortable and the leather is nice, but there are a couple of things to consider. The chair is usually high even when set low. 2. Attaching the seat back to the chair requires the armrests to be attached. 3. One of the armrest holding threads was put in at a slight angle. It did not cause a problem with the final assembly, but a screw could be cross threaded. It's likely to be a one off issue. 4. The seat back must be installed before the arm rest screws can be loosened. The seat back is very difficult to fit in. I would buy this again. I like the chair and my wife does the same.
👤Don't buy! The product was scratched, missing parts and a manual was missing. The parts that came with it were bent. It was almost as if someone just put everything in a box and sent it. It's better to find a different chair.
👤The chair has appealing features. The chair kit that was sent to me by Amazon is not good. Only one bolt on each side of the chair back can be tightened, leaving the chair completely useless, because the bolt hole spacing is too far apart for the metal nuts embedded in the chair back. The kit included the wrong model of chair back or the two chair arms. The factory might have made an error in putting metal nuts on the side of the chair back. I'm trying to get the manufacturer's Customer Service reps to either send me the correct parts or send me a new chair asap. This matter is very frustrating.
👤This chair must be hated by Amazon. I've arrived at the conclusion that the chair was packaged and shipped with contempt and disdain. I've seen boxes that have fallen off trucks on the motorway that were in better shape than what I received. The driver was able to take a delivery photo without the worst side of the box being seen because he faced the three other sides. The wrapping for the arms was not perfect as it seemed to emphasize the haste with which everything seems to have been thrown into the first box available so as to get rid of it as soon as possible. Two of the back's bolts needed some coercing to cooperate because the threads tended to back out of their holes. The tension knob on the base makes it difficult for the allen wrench to be used to assemble the bottom. When assembling the back, the length is useful. I initially thought this was a conscious decision, but after re-examining the packaging, I now think there was no more intent than to get the chair out of their sight. I didn't think heirloom quality or something made in a clean room would be for money. It's a decent chair. The packaging, shipping box, and delivery in general were a disaster.
Installation tools and instructions are in a carton and can be installed in 20 minutes. If the chair has quality problems, please contact them, they will give you a 3-year warranty and replace the damaged accessories for free. After 100,000 experiments, the seat surface is durable for 10 years, and the rotation isdurable for 10 years. An extra 4 cm heightened backrest, extra thick cushions and a thickened explosion-proof seat plate give you more comfort and double coverage. The ZLHECTO office chair uses cotton material which responds to your body's unique features. By perfectly supporting your weight, size, and even temperature, it will help you feel more comfortable in jobs that require extended sitting. The chair has a mesh back that allows air to flow. The mesh task chair is built with easy adjustments for tailored comfort. The armrest and back support enhance ergonomics. The computer chair can support up to 300 pounds over eight hours of continuous use. The rolling casters make it easy to move across the floor. It is suitable for any floor. They guarantee their customers 100% satisfaction with their desk chair. If you don't like the chair, you can email them and get a replacement or a full refund. It's better to MzE than MzE. Order it now and it will be free. ADD TO CART Right now!
👤I had a list of features I wanted in a new chair. 1. My previous faux leather chair was brittle and left a mess around my floor. It's harder to find this when you want the arm rests to have it. 2. I like to sit cross-legged in my chair and have room to do so because of the arm rests. I don't want to be pinched on the edges of the seat cushion, so it had plastic on the sides. High back. I like the neck freedom while I sit. 5. The recline can be locked. One of the few that fit all the boxes was the lower back support chair. I contacted the company directly because the chair wasn't listed in black on Amazon. I was able to still purchase through Amazon because of their support. The only complaint I have with this chair is that the armrest padding isn't super thick. If I dig my elbow into it while leaning for a long period of time, it's usually not a sign of this, but the padding is adequate. The features and quality are great in this price range and I would buy again.
👤I love this chair. For a number of reasons. 1. No tools were needed other than the allen wrench that was provided. 2. Sturdy and comfortable! The seat cushion is very comfortable. The support for the back is strong. 3. Excellent customer service. I need some extra support since I'm just a little too short, so I ordered the free pillow. I was offered a credit for the pillows that were out. I could buy one. The purple chair I purchased at Staples a few months ago was not as good as the ZLHECTO ergonomics desk chair. I'm very happy with my purchase, and I highly recommend this seller.
👤The chair is good for my issues. I need to sit upright with good back support. I like the fact that the seat isn't too wide and cumbersome, and that the back support is adjusted to fit my body type. This chair does not make me feel like I'm falling forward because my knees are a little lower than my hips. It was one reason I ordered it, and thanks to the other reviewer who griped about that feature. The flip-up arm rests allow me to pull it up close to the table, but also put them down to watch TV. I can raise my body up off the seat by pressing down on the armrests, which will open up my spine. I needed the seat to raise at least 20 inches, and some other chairs don't. The only complaint I have so far is that crumbs and hair get caught in the seat webbing material. It's wobbly where the seat connects to the post, like most office chairs.
👤The chair is not comfortable. I am tall and the support didn't meet my needs. The support is made of plastic and slides behind the mesh. It's pretty uncomfortable because it isn't cushion. The back of the chair is too far back for my taste and it isn't adjusted. I feel like I am sitting down rather than standing up. They were out when I requested one, but they gave me a booklet with information about their guarantee, which included a free back support pillow for those that need it. I bet I can figure it out. Customer service was great. I returned the chair because they offered to give me an allowance to purchase a different pillow, but I didn't. I will probably donate the chair because they didn't want me to return it. I'm not sure it will work for me.
The back of the office task chair mimics the shape of a human spine to help reduce the pressure and pain of the back for long hours of work. Even after hours of siting, the soft seat cushion provides comfort. It's ideal for paper work, gaming and studying. The back of the office task chair mimics the shape of a human spine to help reduce the pressure and pain of the back for long hours of work. Even after hours of siting, the soft seat cushion provides comfort. It's ideal for paper work, gaming and studying.
👤I wasted my money on this chair because I didn't have a job, I saw all of the glowing reviews. It's easy to assemble and fit under my desk, which is the only positive thing about it. It is terrible. I was very happy when I first sat in it. After sitting in it for a long time, I felt like the support on the back was stabbing me. It made my body hurt more than my old chair did. I adjusted the height of my chair after watching many videos on how to sit in an ergonomics chair. There were still some symptoms from the back pain. I'm not very tall, but I'm long waisted. I noticed that the support was hitting me in the wrong place and that I was leaning away from it. I removed the support because I don't want the hassle of returning it, and I hope that will fix it so that I have an ok chair. The arm rests are too low, I don't use them because of that, and I wish the seat was a little bit longer and softer. I wish I had gone with the other chair that I had been looking at. I bought a cheaper regular office chair from my local store since I didn't keep the support. I'm very disappointed. I don't recommend this chair. I don't think so, it was overstated in my opinion. Save money for a better chair.
👤I bought this chair because it lowers enough for me to sit at 5 feet tall. I bought a computer desk that is short enough for me to use comfortably and a chair that will scoot under it to save space in the small condo in which I've placed both pieces. The back support is right and the swivel is smooth. I would have liked the seat to be an inch longer, but I mostly sit towards the front, so it's ok. It will be easy to re-cover the seat in some colorful fabric at a later date, I noticed in assembling it. It's just a matter of putting it on. If you're not in a rush, wait for another sale because the price is $20 more today, and I only had the chair a week. It's a good value at either price.
👤I liked the fact that it was high enough for me. It was high enough and had a range of heights. If I was doing something that needed a lot of space, my arms were turned up. There is a I sat in it. It's amazing. I had to put a pillow on it so it wouldn't hurt. I was more uncomfortable the longer I sat in it. I tried a lot of things, but nothing could help me with this chair. The arms are made of plastic. It will reside in the garage and I will gift it to someone unfortunate. Worst purchase ever.
👤The flip-up armrests and the fact that it can be adjusted to fit my height appealed to me. I bought a computer desk that is short enough for me to use comfortably, and a chair that will fit under it to conserve space in the little condo where both components are housed. The back support is perfect for me. It took me 20 minutes to build it with the help of the manual, but it came with all of the necessary materials. It feels great when sitting down. It was a great choice when choosing an office chair. 5/5
The package includes a screwdriver and screws for easy assembly. If you have a problem during installation, please contact their Customer Service. It's too bad that they don't have to tolerate any squeak or wobble, it's excellent craftsmanship. You want to keep it for a longer period of time when you are trying to make a new investment. They offer a 5 year warranty to make sure that any needed repairs and replacements will be covered. Including but not limited to missing parts, damaged packages, or failed function. A healthful standing position is helpful for your body. The Nobofeeling Office chair has a curve in the lower part of the back that is adjusted to match the curve in your spine, so it provides natural balance and total support. A desk chair that is fixed position is not suitable for everyone, so it comes with a range of up and down to meet more peoples' needs and height. If you want to get optimal comfort, you should look for a computer chair with at least four inches of seat height, which will fit your leg length and desk height, to avoid pressure build up and numbness in the butt. The support on the back of the neck should be adjusted to fit the low back, so that it doesn't get stressed out. Between 90-115, the backrest can rock freely. It is more efficient to relax. Soft leather covered on the massive foam cushion, which hits the right balance between firmness and comfort on the office chair seat. The seat evenly distributes the pressure on the buttocks to eliminate the pain on the spine. The mesh back allows air, body heat, and water vapor to pass through the seat and back to help maintain a comfortable skin temperature. Easy to Assembly and Move. They have an Allen wrench and instructions to make the installation as easy as possible and save you time. The importance of silent wheels is not taken into account. All office chairs should have a mechanism to allow easy access to parts of the desk. It can be applied to wood floors, carpets, and other surfaces.
👤I was looking for a chair that was comfortable and cheap to build my new home office. Being spoiled by high quality and expensive office furniture, knowing I will spend the better part of the day sitting in this chair, I was willing to look into more expensive options. I read the reviews and looked at the photos and thought it was worth a try because it looked solid and had all the features I was looking for. I was not disappointed. After sitting on this chair for a month, I'm very happy and pleasantly surprised at how comfortable it is. It is perfect in my small office space. I suffer no back pain at all, that's the most important fact for me. You get a lot of chair for a decent price. This chair is in the price category.
👤I needed a chair for a small desk. I like the way the arms flip up so I can push it up to the desk when I'm not using it. I needed a shorter seat in order to not hurt my legs sitting in it. This chair is perfect for me. The support for the back is not enough for me. I'm going to ask for free pillow support. My 10 year old grandson and I put it together in about an hour and all the parts fit together. I would order it again.
👤I did a lot of research before buying this chair because I work at home and am sitting anywhere from 8 to 12 hours a day. The seat cushion package has an instruction booklet inside. Go from step 1 to the end. All the parts are clearly labeled and I took my time to check them out. You can tell it has good build quality when you assemble it. The chair is very comfortable. The screws and wheels are not heavy. It took about 30 minutes to install. The instructions are easy to understand. The chair is more comfortable than expensive brands. The mesh back is important because of the humid climate. I need to sit straight up for working, but I haven't set it to rock or lean back yet. I probably won't use that feature very often. The arms are raised up to the back of the chair, which is very convenient for me. It's a good chair and well worth the money spent.
👤My wife works from home and I bought this for her. She had the lowest chairs and always had back problems. One day I sat at her office to print something, and the chair hurt me so much I had to sit in it for 30 minutes. She needed a new chair and I knew it was on the way. It is easy to put together fast shipping. She tels me how much she appreciates it.
👤I was very disappointed after assembling the chair and sitting in it for the first time. The support was very strong and very hard. It was something that hurt instantly, not over time. It was very uncomfortable. I'm surprised there aren't more reviews mentioning it, which makes me question the validity of the reviews. The support for the back is terrible. I was not buying the chair for the adjustability of the back, it was just a silly feature added in the manufacturing process. I was able to remove the support completely and it became a great chair. There is not much room to work with but it is possible to remove with the right tools. The bottom seat is very comfortable. There is a lot of cushion. I like the feature of foldable armrests. Even after you throw the "lumbar support" in the trash, it's decent for the price.
Ultra-durable. These office chair caster wheels are built to last a lifetime. These wheels can hold up to 650 lbs. The mesh back of FelixKing's chair is suitable for the waist and back curve. It helps you to maintain a relaxed posture in long hours of work. It's easier to relieve muscle fatigue. The surface of FelixKing's chair is made of high density natural sponge which is designed for the curve of human's butt. It can help reduce body pain. The thick handrails and high density mesh make sitting more comfortable. It can protect your back and spine. The armrest can be put under the table. It saves space and is easy to store. The armrest can be moved 90 degrees to relax the muscles and have fun at the same time. It can be used in living room, study room, meeting room and office. The height of the chair can be adjusted according to the height of the desk and the height of the person sitting on it. It also has a rotation. It can reduce your body's pressure with the 30 degrees of recline and structure of distributing the pressure-resistant. Promote your own circulation. A caster can be moved. It can be assembled with the simple tools that come with packing. You can complete it in about 15 minutes. The warranty is for a year. If you have a problem, please contact them at any time and they will provide you with a solution.
👤The chairs were very nice. The seat padding is good. I ordered two chairs. I'm holding the broken leg together with zip ties, it was where the wheel pin entered. One chair made loud popping noises when leaning forward and backwords. POP! I can't tell where the noise is coming from but it seems like it's at the base of the engine. The whole house hears it. A kid is using it. The other chair began to pop after 1.5 months. The sound of the squeek is loud. It seems to be coming from the same spot as the other chairs. It doesn't stop after I lubed it. The noise is making you want to buy a new chair. $250 was wasted. Absurd. The company offered me $20 to have my review deleted. A faulty product would be better received. I wonder how many honest reviews were deleted.
👤I had been using one of those ottomans as a desk chair since April. After 8 months, I decided to make my work area look like an office space, and that included getting a grown up chair. I only needed a couple things out of the chair. Since space is limited, I could push it under my desk. Some type of support for the back. The design of it stood out to me because it checked all my boxes, and I'm still healing from a back injury. It was more fun looking than a leather chair. It was easy to assemble and was ready to go in 15 minutes. It feels very sturdy, not like it's going to fall apart or collapse on me. I like the fact that the support can be adjusted in height, since I sometimes use the partial balance ball when I'm working.
👤I used this chair for about half a day at my desk. I don't understand how this chair has a rating. It is the most uncomfortable desk chair I have ever sat in. It looks like it would be comfortable, but it isn't. The back support is made of plastic and you slide up and down in it. The control lever allows you to recline. It allows for different sitting heights from stooping on a 5-gallon bucket height to pulled up to a normal desk. The seat portion is made of wood, foam and black fabric and is flat. If all desk chairs at or below this price point are like this, there is good reason to spend more on a quality desk chair that won't hurt you. Once I figure out how to take it apart and get it back in the box, this one will go back.
👤My daughter wanted a chair that matched her desk. I think this chair is good for a Star wars theme room, but it looks great in my daughter's room and matches her desk. The chair was easy to assemble. The instructions were easy to follow and I had the chair built in less than 5 minutes. My daughter loves the fact that the chair can be slid into the desk and even further into it, if you raise the armrests. We were not expecting that feature. I took a video of the chair so you could see it, because it is better looking in person than in the photos. The chair does not recline. The chair has good support for the back. It's a great chair for doing homework or playing a game. My daughter is doing school remotely and so this chair has been used a lot so far. We're glad we took a chance on it because it looks great in person. It is definitely an eye catcher.
Their gaming chair is large, unique and body hugging, and can last for hours. Their premium quality multifunctional game chair is very comfortable and can be adjusted to any sitting position. The most comfortable gaming chair you'll ever sit in has an extra high back and supports your neck and spine. Their gaming chair has a memory foam seat and high-end gel cold cure foam seat cushion which provides an added comfort layer, optimal support and encourages good posture, and is included with the included memory foam seat and high-end gel cold cure foam seat cushion. Everyone can use it. Anyone can comfortably use their game chair, it has a height-adjustable mechanism, back angle and recline/rock locking system, and wider armrests. Sit back, work, play, or relax, you can choose the seat you want. Premium construction with high quality materials, leather, fabric and memory foam guarantees you will enjoy their chair for years. The metal frame, explosion-proof gas spring, and heavy duty metal base provide a sturdy foundation for the chair that can hold up to 450 lbs. Their chair is available in neutral black and brown, which will complement and give you more space to place it. Buy with confidence. Their priority is your satisfaction. They have a customer support team ready to assist you with any questions you may have, and a one year warranty on parts. Grab your gaming chair and be safe! Take your gaming experience to the next level with supreme comfort and support by clicking "add to cart" now. Buy with confidence. Their priority is your satisfaction. They have a customer support team ready to assist you with any questions you may have, and a one year warranty on parts. Grab your gaming chair and be safe! Take your gaming experience to the next level with supreme comfort and support by clicking "add to cart" now.
👤This is a one star for the big people. I'm a large man. I found a big and tall chair that is made for over 400 lbs. The chair is made from strong material to hold my weight. The problem is here. The seat is for large people. It's small for someone who weighs over 400 lbs. If you can't fit in the chair, it's a good thing. The chairs I have sat in have bigger seats. Someone who weighs over 400 lbs is going to be wide. This is the same thing as buying a belt that wraps around a person of 450 lbs, but only making the loop holes to fit someone with a 36 inch waste. It is pointless!
👤This chair is very comfortable for plus size people. The chair I received is sitting without wheels because the base and s are made of soft metal and the wheels started to bend because of the pressure. The wheels should not be sitting sideways after 3 weeks of owning the chair because I am not close to the state's 440 lbs limit. I am eating this 3 stars as I have not had a chance to speak with the Customer Service yet, so I am willing to add or remove stars depending on this aspect. As soon as I find out, I will update. Customer service is great. Within 5 days, I had a new base. The wheels have held up so far.
👤The chair is very strong. I'm 330 lbs and sitting in this chair you can feel that it is built to last. The chair is comfortable for my height, and most parts are adjusted in order to provide support and comfort. There is a bolt for the armrests on both sides that sits directly under the levers, which could be improved. The tool that I was given was too long on the hex side to fit into the head of the bolt without being pushed sideways by the lever. I had a set of Allen wrenches with the correct size, but not everyone has that kind of tool set. The heavy duty office chair caster are loud on hard floors and do not work well on pile carpets. I will be using them in my workshop for a cart I'm building, but they are a bit lacking for a chair. As a software developer, sitting in a chair for an extended period is part of my job. The majority of the back of my thigh should be supported if I were a tall person. The seat needs to be deep to provide the best support. The area of the seat that provides support seems to be less than the distance from the base of the seat to the furthest point of the front. I feel more pressure at the base of my spine when I sit upright and work. There seems to be a hard pressure point in the outside hip area, as well as the lumber support and the sides of the seat. Not sure what's going on but larger people may feel worse. There are four Arm rests could be a little more comfortable. Once you have the arm rests in place, there is a lot of wiggle room. There is no padding on the arm rests. These fit and are comfortable.
There are product appraisals. The overall size is 28.5"W x 35"D x 45.5"H and the seat is 22.5"W x 24.5"D. Some chair installation instructions still use the old instructions despite the fact that they have upgraded the DD-Dedeo ergonomics office chair. They would like to apologize to their esteemed customers for the hassle caused by the new installation instructions they have provided on the details page. The Dedeo Office Chair has the ultimate comfort and unique appearance. The new multi-arc support design of the Dedeo office chairs supports your entire back, neck and head, as well as providing lower waist support. For more than 8 hours, you can maintain a healthy sitting posture. Dedeo home office desk chairs cushions are made with high quality materials, which can still maintain elasticity and comfort for a long time. High density materials do not bounce back over time. The thighs and calves are under a lot of pressure. The shape of the back helps to align the spine. TheBreathable Mesh Back & Load-Bearing allows air to circulate to your back, keeping you cool and comfortable, and enabling you to concentrate on the task and increase productivity. The mesh back provides good support for the back. To save space, push the office chair under the table. The chair can hold up to 400 lbs. The upgraded gas lift is a reinforced framework that is sturdier and safer. It is easy to adjust office chair height. A heavy-duty base with rolling wheels for smooth running on floors. The recline function makes it possible to tilt the back. If you feel sleepy, you can lie down and take a nap. Moppson office chairs give you a comfortable tilt angle and allow you to enjoy the moment. All Dedeo office chairs come with a one year warranty. If you have any questions about their chair, please contact them in time, they will give you a satisfactory solution as soon as possible. Installation of the home office desk chair is done in 5 steps. Perfect office chairs, study desk chairs are the best gifts for yourself and friends.
👤I got a new chair to replace my old one. I love it. It came in a nice box and it was easy to assemble, but there was an error in the assembly instructions. The long C screws are used to connect the backrest and armrests. The armrest needs to be connected to the seat cushion with long C screws and medium B screws. The chair is great, except for the instruction error. It has a mesh back that is soft and can be raised up and down. The seat cushion is thick and comfortable. I like that the chair can be pulled up so that I can push it close to the desk when not using. I like to rest my head on the tilted headrest, which can be adjusted in height as well. The office chair is very comfortable and has a nice feature. It can raise and lower its head and has a tilt back function. Can't go wrong with this office chair if you pay attention to my correction on the assembly instruction. Highly recommend it!
👤The chair looks great, but when I got it put together, the plastic support snapped in two, and I had to replace it. I was told by Amazon that there was no way to replace a faulty part and that they had already sent me a new chair. I really like Amazon customer service, but this is wasteful. I don't need a new chair, just a piece of plastic. I would change the review if the seller sent a replacement part, but I don't think there is a way to do that. I hope the rest of the plastic used in the manufacturing process is better.
👤A friend bought a chair. He recommended this chair to me after he experienced it for a while. He suggested that I buy an office chair and put it in my home office. The transportation is fast. I like the speed of the delivery. I completed the assembly of the chair myself. The screws and accessories are in the package, so no parts will be lost during transportation. There are additional screws if the chair loses the screws. The chair is very comfortable, the bottom is very soft, and the mesh back is perfect. The chair is very comfortable to sit in. The standard configuration of this office chair is rotation. I weigh close to 300 pounds. The chair is comfortable for me. I will not feel tired when I sit on the chair for a long time. My experience tells me that this is a chair that deserves five-star praise. This is also true for prices.
👤The standard office chair. It is very easy to assemble. It seems sturdy. The chair moves well with good wheels. The adjustments work as expected. The weight limit for this chair is 400 lbs. I think that may be positive. The chair is comfortable and I can see it being realistic. I suggest you look elsewhere if you are around 350lb.
The ProGrid Back has built-in support. Extra comfort is provided by the arms. Net weight is 50.1 lbs and weight capacity is 250 lbs. The pneumatic seat height adjustment is easy to use. Three levers to modify angle of back relative to seat, control tilt and forward tilt for keyboard intensive activities are part of a multi- function. A tilt is a free float or locking. The control may have back height adjustments. The seat depth adjustment is done on the seat. The chair should be back relative to the seat to reduce the pressure on the buttocks and thighs. It's like a Swivel. The chair rotates in either direction. Every executive and task chair has a standard.
👤I decided on this one after spending a lot of time researching chairs in the sub $200 category. The Alera Elusion High Back chair and the Lorell Executive Mesh High Back chair are both very similar to this chair. This is a review of a sub-$200 chair and will not be compared to the likes of $800-$1000 chairs, which seems some people like to do for some reason. I work from home at least once per week, and I also spend a lot of time on the internet and gaming. I needed a chair that was comfortable for a long time. It was mostly down to a lot of store brand junkers and the Ikea Markus, which gets very favorable reviews across the board. The Proline II was recommended in an article by PC Gamer on May 2, 2015. I bought it and am pleased with it. Overall build construction appears to be good. There are pros and cons to this and we want to do some of them. I don't think it's "plush", but I don't notice it after eight hours. I consider that a win when I consider comfort. The back mesh gives support. There is a good amount of support. Casters are smooth and easy to use. There are a lot of adjustments available (seat front-to-back adjustment, armrest height and width adjustment, seat angle adjustment, backrest angle adjustment, and forward tilt). There aren't many chairs that give these adjustments at this price point. I don't think this will fit the bill for those who need a lot of support. I find that if I stay upright, I get enough support. The tilt tension seems low. The chair back will still move with very little movement even at the most tight tension. I would have liked more resistance. I have the backrest locked most of the time, so this isn't a big problem. There was a tear on the bottom of the cushion. I'm not sure what hit the box, it was undamaged when it arrived. I've asked Office Star to remedy this without returning the entire product. I'm pretty sure it will spread if I can't get it repaired. Arm rests are made of plastic. These aren't super soft, so be aware. They still have some side-to-side movement even after the knobs are tightened. It's not a dealbreaker, but it is notable. I am very pleased with this chair and I spent less than $200 to get it. I think it's a good price for it's amount of features. I don't understand the reviewer who complained about hard-to- understand instructions. The assembly was straight forward. The entire box is made up of the "Mechanism" and the adjustment levers. It's funny that the instructions don't say "The Mechanism", but it's clear that it's exactly what it is. I assembled it in less than 15 minutes and I would assume most other buyers wouldn't have a problem with it. One of the bolts that attach the mechanism to the chair is difficult to get at due to the levers. The supplied allen wrench should be able to tighten it down in less than a minute. If I'm able to sort out the fabric tear, I'd be happy to change this to a five star. Send an email to the company with pictures of the tear and fill out a form requesting a new seat. Within a week of receiving the email, they had shipped me a new seat. Excellent customer service boosted to five stars.
The Serta Big and Tall Smart Layers Executive Office Chair is the most comfortable seat in the office. Premium Serta Ultra Smart Layers Foam, Comfort Coils, layers of body pillows, and supple leather are included in the Plush Comfort. There are settings for a comfortable seating position and an elevated headrest to support the neck. Big and Tall supports up to 350 pounds with heavy duty components. It is designed to help alleviate strain. It is easy to move around with multi- surface casters. It is easy to move around with multi- surface casters.
👤When you buy an office chair, you don't review it until a week after you get it. I have given this chair six months, and here is my review, I had to remove the coverings because the arm rests became loose within weeks of the difficult build of this chair. We are currently on my fourth tightening job after only a month. I am 6'2" and weigh 200 pounds, which is well within the range of this chair. I don't sit down like a fat man from a six foot platform, I sit down gently. The cylinders that control the up and down were malfunctioning for four months. I will be sitting in the chair and it will suddenly fall to the lowest level. Sit for a while and it will drop again. There are three I contacted the company that sells this chair for Serta and they told me that I was outside of the 30 day warranty and that it would take forever to get the parts to fix it. The chair is a pig with lipstick, but it's intended purpose is to sit at your desk in comfort, without waiting for the floor to drop from under you. I don't leave a lot of reviews, but I feel compelled to warn people not to buy this piece of junk.
👤Between work and gaming, I spend a lot of time at my desk. I have been looking for a chair that is comfortable. I chose this chair because I like the idea of having a big and tall chair and it would be a better fit for me. It is too big for me. When I lean back, I am on my toes. The width between the arm rests is about 1.5 inches wider than the "at your side" arm position. It is the most comfortable chair I have ever used, but the height leaves something to be desired. It doesn't push up under my desk, which is frustrating. The arm rests are level with my desk. I have a nice place to rest my elbow. The build quality of Serta is what I would expect from a desk chair. The arm screws or vice grips need a longer alan wrench to fit on the short end of the one provided. Good buy for the money. If you are over 6'3", it's a great buy. I would go with a regular chair if I were taller.
👤I bought this chair because I needed the support for my teleworking and I am a big dude. I'm not near the maximum allowable weight of 400 pounds because I'm over six foot tall. I went that high on the scale because I wanted to sit on an angel's feathers if it could support 400 pounds. 1. The support for the back is not adjusted and it reminds me of the days when my wife was pregnant with twins and wanted to be the big spoon. I feel like I got a massage from an Amazon Warrior at the end of the day because it pushes my entire lower back in so much. I prefer to sit straight up for my entire work day in fear that my back will be sore from sitting in it. 2. The seat cushion has pictures of all the layers and supports, but it was flattened by the second day and it feels like I am sitting on a prison bed. I put a pillow on the chair seat by the fourth day. 3. The bolts for the arm chairs were not easy to thread in the seat so they were loose, and the bottom of the arms were too small to fit in the extra room. I couldn't get the bolts in at all because the thread area for the seat back was cross threaded. The arms spin around if I move just right. 4. You would expect the chair to be put together well, for almost 300 dollars. The bottom of the seat and the wheel attachment plate is so off center that the entire chair tilts to the right. I am leaning to the left to stay away from the support. This is the most expensive and worst office chair I have ever owned. I'm sorry, but if you're a big dude or dudette, and you're looking for a chair, this isn't it. The search continues.
If you spend a lot of time sitting in the same position, this stylish chair is going to make your life easier. The highlight of your workspace will be the high end look of this chair. Their chair complies with the standards of the American National Standards Institute. Black LeatherSoft upholstery has a foam padded seat with a fire retardant foam. The waterfall seat has a high back design with built in support for the spine. A tall office chair. There are product appraisals. The overall size is 28.5"W x 35"D x 45.5"H and the seat is 22.5"W x 24.5"D. There are product appraisals. The overall size is 28.5"W x 35"D x 45.5"H and the seat is 22.5"W x 24.5"D.
👤I am a heavy ass. Weighing close to 500 lbs. I have had this chair for over a year and it has been supportive of my big size. It has not given me trouble before. Sometimes the seat will stay where I want and sometimes it will lower automatically. Either the support is giving out after a year or my big ass is over the limit. The chair is strong. It's a good recommendation for a big man that needs a comfortable place to sit. I have had this chair for almost 4 years and it has not held up well. The piston won't stay up anymore after it stopped working. I want to change to a chair that is more comfortable and lasts longer.
👤The chair creaks a lot and the seat cushion is a joke. The front arm rails hurt my legs. I am going to buy a separate seat so that my butt doesn't hurt when I sit in this chair. Don't buy. I had a chair that broke after sitting for years, but this one is new. The construction of this chair is not good. The welds are messy, the wheels are cheap, and the cover is plastic. The back of the chair was loose when I moved to the room that will have it. The bolts holding the upper to the armrests were missing. The bolts came out about 1/3 way after I grabbed the tool. The chair had to be moved to get the bolts in the right place. I am a heavy man and the 500lb rating is what made this chair for a reasonable price, but I doubt the construction of this since half of the lower part is plastic. A quality chair would use this part as a single piece steel construct since it supports your weight. I don't think I'll get the same life expectancy out of this one. 2 stars on materials, 4 stars on price, and 5 stars on delivery.
👤I got a hercules chair on my first attempt. Albiet had a box that looked like a forklift and a chair that was mangled. The box was in better shape on the second one, and the chair went together in about 5 minutes. The chair is very comfortable and easy to use, I weigh about 325 lbs, and it doesn't flex under me. I can't rate this chair higher than 3 stars, as Amazon denied my previous review saying it was against company standards. The condition of the first chair is considered a bad thing if you tell the truth. I pulled the bolts out of the package before I told people that the chair was bent and had a big hole in it.
👤This is a decent chair. If you are a big man, you are hard on your computer chair. Choices from other companies in the price range are garbage. The pumps don't work after the first week. This model of Hercules is not one of them. I weigh around 350 lbs. The arms broke in less than a year after I had a 400lb hercules. The bolt that holds the arm to the frame broke when I had this one. I am going to contact the company to update this review because it is still under warranty.
The office chair has thick fabric back and is comfortable. 4 inches thick fabric seat and armrest. The lock function and title are 15 degrees. The chair height can be adjusted. It is possible to be rotating. The maximum load is 400 pounds, and it is wearing an office chair. Inside the box is an office chair handbook. The chair has a 36 months warranty. It was passed by the certification. The chair has a dimensions of 25.4"-30.2"D x 28.1"W.
👤I had to use my own allen wrench because the one they include is made of a cheap alloy and can be destroyed easily. The chair is made of sturdy materials. Should be able to stand the test of time. The cushion is not shaped for comfort. The forward lean results in having to scoot back into the seat frequently as well as excessive pressure on the tail bone. The only thing that helps against your butt is the backrest. If you spend more than four hours a day sitting for work, you will experience bad tail bone pain. It could be reduced with a seat rocking mechanism. I don't think this chair is a good one for a sit down job. I had higher expectations for the price I paid, but I got a smaller chair that was made of non recycled materials that provided more comfort than this one.
👤The chairs I bought were not very comfortable. The cushion isn't thick enough. The butt hurts when you sit a few hours. The chair I bought this time has a thicker cushion. It has a cushion shape that is more comfortable. I would like to give five stars. It is worth to buy.
👤I'm a big guy and sitting in this seat is like heaven. It is wide and sturdy. Nothing shakes or squeaks. When I sit down, the Hydraulic doesn't lose air or lose its strength. The support and lendth of the seat is something I love. I don't feel like I'm falling out when I sit and I don't have to change my seat position every few minutes. I spend a lot of time in this chair and it has held up better than other chairs I have bought in the past. This is my new office chair. I'm thinking about buying another room.
👤I researched a chair that was under $200. I don't understand why a chair of that price is worth it. I need good support and comfort while I sit in an office. I don't have to change or shift to get comfortable. The seat is thick and built well, and provides nice comfort and support for my hips and lower back. I have had less neck and back pain. I thought the back was taller than it is, I'm 5'4" and it hits above my shoulder blades. I was concerned. I don't think it has any support behind my head. It's a great chair for sitting for long periods of time, but it doesn't have an adjustability like many others, my only reason for 4 stars.
👤After sitting on a dining room chair for two weeks my back was dying, I was looking for a good office chair and this one is perfect. I built it in 20 minutes. I felt relief in my back. It is only the first day. I can tell my husband. I anticipate buying a second chair soon, I will be fighting over the new chair.
👤I have gone through a few chairs that didn't provide the support I needed. I suffer from back pain from previous car accidents and back support was one of my top priorities. The chair is giving me life. Assembly was easy, but it took me some time because my husband was at work. I was able to pull through despite the fact that I had a 1 year old running around. The chair doesn't sink after a long time. One of my best buys.
Best office chair for 400lbs products from Amazon Basics. In this article about best office chair for 400lbs you can see why people choose the product. Anacci and Noblewell are also good brands to look for when you are finding best office chair for 400lbs.
Amazon Basics, Anacci and Noblewell are some of the best brands that chosen by people for best office chair for 400lbs. Find the detail in this article. Nobofeeling, Felixking and Von Racer are also brands that their products are worth to check.