Dolphins have been cleaning swimming pools for more than 35 years, providing pool owners with a hassle-free cleaning solution. Spending time with family and friends is what really matters. Changing hoses and pumps can be made easier with an upgrade to the Intex Plunger Valve system. Includes 2 step washers and 2 hose o-rings. For use with the following: 28663EG,
👤This was an upgrade that I could upgrade to. I upgraded the pump to the 1500 GPH and since I didn't have plunger valves, the time was right. The 1500 and 2500 GPH Intex pumps come with a 1.5 inch hose. I connected the type B adapter I bought to the inlet and outlet on the pool. Some people use the valves on the pump side. The 90 degree angle seemed to put less stress on the hoses than having them stick straight out. I uploaded a picture of the parts. This thing is well built.
👤This is a must-have for large above ground pools. It is convenient to shut off the water. I have an Intex in deep. The outtake is attached to the leaf basket, and the other is attached to the plunger. I attached one to the leaf basket because it was easier to get all the new hoses and parts for my pool. You will need a type B adapters to connect everything to the pool hoses. Pictures were attached to help.
👤The valves make it easier to work with the filter system. I was led to believe that I needed to connect to older, smaller hoses, but I learned I don't. I would like to thank Amazon for allowing me to cancel that. I slipped the older hoses over the valves because they were snug and did not leak. The Intex 2500 pump is very hard to repair and leaking is a definite requirement. Over the last few years I've fought with the cheap stock pumps and hoses and almost gave up on having a pool. The combination pump and valves have given me pleasure in the pool.
👤I was hesitant to buy them. I have the intex 15 ultra frame and it has a small filter and smaller hoses and fittings. I upgraded the filter to the intex 2500gph pump. I had a problem with the hoses being too big and not fitting on the pool fittings. I found some parts at the hardware store. I should have bought the 1.5 to 1.25 hose adapters. They fit the hoses that come with the 2500gph pump. Who knows what the actual measurement is because my hardware fitting says it is a 2in that fit that hose. I decided to buy the plungers to make it easier to cut off the water so I could attach the vacuum. I was asked if it would fit the hoses. Are the hoses 1.5 or 2 inches? I know it won't fit on my pool fitting. The side with the gray screw on piece is perfect for the treads on the pool pump. The hose that came with the 2500gph pump also fits the plungers. The black o ring is a tight fit, but it will slide in the hose and use the gray threaded part to secure. I attached directly to the pump which is not recommended. I would have needed the 1.5 to 1.25 hose adapters if the pool wall had been attached with the plungers. It would have been great if Intex provided instructions for the pumps on the smaller pools. I hope I can help people.
One year warranty. The most innovative pool robot cleaner for Max. 100m2 inground pools/above ground pools is PAXCESS. The pool cleaner robot is powered by a 5000 mah battery, which can achieve up to 90 minutes of work, and can operate without a cable attached to an electrical outlet. Please be assured to use the IPX8 waterproof design. This automatic pool cleaner has a powerful motor and a fast moving speed, which makes it a great pool cleaner. A robotic pool cleaner can clean your pool water by trapping leaves, dirt, and sand, leaving it sparkling clean. Your pool cleaning duties will be taken over by a robot. When the battery is drained, the automatic pool cleaner will stop beside the swimming pool shore. Pull up the floating handle to let the pool cleaners get to the beach. The robot pool cleaner can be plugged into any 110v outlet. It takes about 3-6 hours for full charging. It's easy to clean. It has a floating handle that can follow the robotic pool cleaner. It is convenient for elders or women to take the pool cleaner out of the pool. The pool cleaner can climb. All pool types, such as concrete, fiberglass and vinyl liner pools, are safe for the PAXCESS robotic pool cleaner. Energy-saving pool cleaner. No installation, no booster pump, nouction lines, norobotic pool cleaner, no maintenance, do not rely on any equipment to get the job done. You can adjust the nozzle on the pool cleaner by turning it to control the moving route to efficiently clean the pool's floor. If you have any problems, please contact them.
👤At this price point it seemed too good to be true, but this little sucker, well it sucks, but in a good way! I haven't washed our pool since September, we have always had a problem with the roof sand shingle running off into the pool when it rains, and with the kids dragging in fine sand as they run between the pool and the yard. I've never been able to get our pool vac to be completely clean. The little guy was able to remove 5 pounds of sand from the bottom. I was embarrassed by the state of our pool, but it did a great job. It was easy to leave the pool. I pulled the cord to the edge of the pool so I could grab the handle. I didn't have the issues other people have had with leaking contents. The instructions say to put the brush on the bottom to keep it from leaking. I was able to clean it without damaging my nails because I unclip the sides. The wheels are hollow. It takes a little longer to clean up when the contents spill into the wheels. The charging cable doesn't fit in an exterior outlet. I have to drag a wet vacuum into my house to charge it. I hope it lasts awhile, but I am pleasantly surprised by the vacuum.
👤It works well for our pool size. Thought it was going to flip over on the slopped walls, but have never done it. It had two fins. One blue and one clear. I believe one of the instructions is an extra. There is a jet in the front and one in the back. I changed one of the jets so it would make more turns. It is easy to change the jet angle. Just have to twist it. It makes more turns because of this. The coverage seemed to improve with the odd shaped pool. In any case, it cleans the entire pool in one go and there is no issue. It is very easy to use. Our previous vacs had hoses. This does not get tangled. The pool pump and filter are not affected by debris. This isn't an issue for us because it doesn't do walls. The walls are usually clean. It worked for about six months, but then began to have problems picking up dirt. Customer support sent me a new one after I contacted them. The brush on the bottom is bent up from sitting on a flat surface for a long time. The new one is on the block.
👤I have owned the cleaner for a couple of weeks. I like it so far. The Paxcess does a good job of climbing out of the deep part of the pool and back up to the 3ft area to continue sucking up debris. It runs for an hour or so, and it takes around 4 hours to charge. The screen on the filter tray can trap fine particles so you can dispose of them in your trash or the drain. It's easy to clean under a hose. The attachable brush is a bit thin, so my only concern is that. It was able to clean up some light green algae spots that I purposely let build up, but I think a thicker brush could prevent pool owners from manually brushing a few extra times a month. It was well spent.
The included items are automatic Weir Valve, 90 Elbow Twist Lock, 7 x 1.2m Twist Lock Hose Lengths, Flow Regulator Valve, Hose Float, and a warranty card. The robotic vacuum will clean the pool for you. It's ideal for small swimming pools up to 33 feet. The cleaner is easy to use and will make your pool ready for splashing in just 2 hours. When it comes to pool cleaning, efficiency is important. Dolphins are 8 times more energy efficient and do not rely on your pool pump or filter to get the job done. Every pool cleaning can be done without the pumps and hose. Dolphin does all the hard work for you. The Nautilus CC was designed to clean your pool. You can relax knowing that your pool's floor and walls are left clean. The touch of a button will clean your pool. You can schedule the Nautilus CC to clean your swimming pool every day, every other day or every 3rd day. Dolphins have been cleaning swimming pools for more than 35 years, providing pool owners with a hassle-free cleaning solution. Spending time with family and friends is what really matters.
👤Don't rush to judge this cleaner. Give it a few days to see what it does, I was not impressed with what I was seeing at first and almost sent it back. It's easy to get going. I have noticed that weight was a big factor in my wife's decision to marry me. It is light, but that comes with another problem. Sometimes the tracks spin or the cleaner slides down the slopes of the pool. I'm trying to figure out a way to add some weight to it. No and yes, candelabra technology. I don't see how the cleaner could have a smart navigation system unless it had a gps device. Although it might take two cycles, it eventually cleans the whole pool. It gets hung up on the ladder but eventually gets off. If it is going backwards, it has a problem going over the drain. The brush will go over the drain if it goes first. Anti-TANGLE technology is not available. It was twisted about 3 times on the first day. You have to take it out every other day to clean it. This is not a huge deal but it would be better if it had a $10 mechanism. Control unit. The only feature that is included on the CC is the option to repeat every day, every 2 days or every 3 days. It's not stated in the description that you have to re-select the repeat option every week, so don't think you can set it to repeat every 2 days and you're good. There is power cable. The unit is ideal for 30 feet pools. I would agree with some of it. I had read that it did well for their pools. I have a 36 foot pool with an 8 foot deep end and a plug about 10 feet from the end of the pool but I noticed it wasn't going all the way to the bottom of the wall. The cable was not straight. I have more than enough cable because I have another plug in the middle of the pool. The power cable was measured at 45 feet, but I took into account how far away you have to put the control box. One of the best things about this cleaner is that it is easy to clean. The bottom hinges open at the touch of a button and you can spray it with a hose. If you need to remove two of the side panels, you can. This part of the unit is very satisfying. Pool cleaning. We haven't hit the bad part of summer yet, but it seems like it cleans well. When it rolls over, it throws up some debris. It seems as though it picks it up later because once it stops the pool is clean with a few small exceptions. It climbs the walls well but not always. It takes about 3 or 4 seconds to scrub the waterline. It climbs up our first step, but it's not much. It can't go down the step so it falls back off. I hope this will help others answer some of the questions I had. I don't know why they cost so much. I guess it's because we pay it. I hope it lasts.
The skimmer net is durable and deep. Air powered is the type of power source.
👤We were not able to use this product because the threading for the intake adaptor for the vacuum did not match the intake on our new Intex metal frame pool. The vacuum intake and the intake connector that came with the pool are pictured. The vacuum cannot be attached to the pool. We tried to call Intex many times but never got through. We couldn't find any help on their website and we couldn't get in touch with customer service via email. We are returning the product because we can't use it and can't get assistance to fix the problem.
👤I bought this cleaner a year ago. I have an Intex pool that is 18 feet above ground and I was excited to have a cleaner with connections for it. Like other's who have written reviews here, I stopped moving. I have an adequate GPH on my sand filter. I made sure the screen on the cleaner wasn't full by checking the hose connections. When I put the cleaner back in the water, it would stop moving after a few minutes, but it wouldn't stop again. The end of pool season was near and I was frustrated. I took it out and put it away. At the beginning of the pool season, I put it in the pool and it took off. After about 10 minutes, it stopped moving and wouldn't start again. I opened the cleaner after taking it out. I noticed that the motor had a lot of turning movement and the ends of the cleaner were not lined up with the outside openings. The cleaner couldn't move around because the water ends weren't lined up. There is a grey nut on top of the cleaner that the hose D hooks to. I screwed the nut back tightly after I removed the nut and lined the motor up. I re-attached hose D to make sure there wasn't any movement in the motor so the water ends wouldn't become stuck again. I put it back in the water and it ran perfectly all day. You have tried everything else and your cleaner won't move. Make sure the motor ends where the water shoots out is lined up with the cleaner 2. Make sure the nut on the cleaner is tight.
👤I thought it would be foolish to replace my pool vac for less than a third of the replacement cost, but this Intex automatic pool cleaner really, actually, and incredibly works. It's fun to watch it and see what happens. My pool was clean in an hour, and it had covered every square inch.
👤It works great. Hooks to water are not on the pump side. The sand was trapped by the filter screen. I love it! It took four hours to run it, then cleaned the vacuum screen twice. The Coleman pool I have is 22' x 52" and has some crease in the liner. My pump has a sand filter. The pump zooms around the pool. The vacuum would probably be too big if there was more water pressure.
SmartNav 2.0 is a robot. Only 14 lbs. The DC motors are energy efficient. One year warranty. Cleaning action. The Dolphin Nautilus CC Supreme robotic vacuum cleaner is easy to use and has a lot of features. The robot cleans the floor, walls, and waterline for a clean pool. A pool is being cleaned. This premium cleaner is connected to the internet so you can set advanced cleaning schedules, choose between cleaning cycles, delay start, and spot clean, and use the MyDolphin Plus App on your phone. Make your pool perfect from anywhere, any time. The Nautilus CC Supreme has you covered from an impromptu pool party to the calm after a storm. Choose between the quick clean, focusing on the floor only, the standard cleaning for floor, walls, and waterline, or the enhanced clean for extra scrubbing time. Plug and play for a clean. Since this cleaner works on its own, you don't have to worry about the effects of low pressure or a damaged pump on the cleaning performance. Saving energy with every pool cleaning is possible with an average operating cost of 5 cents per hour. Dolphins have been cleaning swimming pools for more than 35 years, providing pool owners with a hassle-free cleaning solution. Spending time with family and friends is what really matters.
👤The entire experience of buying my first robot pool cleaner from Amazon has discouraged me from ever buying a robot pool cleaner again. I didn't notice the robot was spinning around in circles until two weeks later. I noticed that the tread had come off one of the tracks when I inspected it. I contacted Maytronics and they said that you have to pay to ship the item to their location for repair, which would be more money spent on an already expensive item. I paid a lot of money for this thing and now I have to pay for it to be fixed? The policy of the seller is worse. You have to pay a 50% restocking fee to return this item. Your purchase is done. I would never buy a pool robot cleaner again. The customer service is horrible and designed to make your purchase final and keep you from having to pay for repairs.
👤The pool cleaner stopped working within 2 hours of being received. I would turn it on and it would turn off. The filters weren't close to full. The lack of manual was the reason the machine wasn't working. I had to go to the website to flip through the book. You would think there would be a manual for that price. I couldn't find any information on what the different light colors meant, other than blue good and red bad. I had no idea what to look for. Right of the bat it wouldn't connect to the internet. I tried on both of them. The lady was very nice when I called the number on their website, I get that there are defects in some products. I wish they would have sent me a brand new cleaner as this one was broken from the start. I have to send this one to them for the repair attempt. They should have sent a new one after paying so much. If the repair works, I'll update this review. I'll be getting my money back and choosing a different product if not. I left my original review for comparison with this update. The people I spoke with were very nice, professional and reached out to me after my initial review to see what had happened so they could put notes in for the tech that would be looking at my cleaner. She sent me a link to the owners manual for my machine. I was pleasantly surprised by the call. I explained to them what had happened, she apologized and promised to get back to me as their tech looked at it. There was an issue with the motor. I got unlucky and got a bad unit. She called me back and told me that it couldn't be fixed and that they had a new cleaner for me to use. I got that cleaner in the mail this morning and I was able to connect it to my internet and set it to do a deep clean cycle without any issues. It seems to do what it is supposed to do and I have had no complaints so far. I would like to thank the people that helped me out with this issue, and wish all companies support staff were like that.
A minimum flow rate of 800 gph is required. There are 10 hoses for a 30' pool. Does not clean stairs. It's necessary to have at least a 1hp swimming pool pump or 1600 GHP. There are no tools or electricity needed. Attaches to your existing system. The cleaner should be moving quickly around the pool. Automatic operation by self-navigating around the water on set patterns for the top to bottom pool cleaning. Refer to the PDF attached for the manual and guide.
👤I usually don't write reviews but I felt that this one was justified. If you're reading this, you might be considering passing on this item because of the low price and some negative reviews. My experiences with this guy might be helpful if you read this first. My pool is an old 20x40 vinyl lined sand bottom pool. It's got nothing but sharp corners and angles that make it eat pool vacuums for breakfast or any other time it's hungry. It is surrounded by trees. The pool is where vacuums die. This is a 4 star review because there is no help with the vac to explain why it might not be working. Line one - don't use all the included hose sections if you have old ones. The heavy duty hose is cool in theory, but its weight and inflexibility made it hard for me to move. I found that using only two sections of the aqua hose was enough, but I needed to use them more. The machine is designed to work with that weight, but the sections that always sit at the surface should be replaced with something lighter and more flexible. Without a separate power source, this vacuum can have trouble fighting the hose on the walls, and it works by "hopping" with the motion and weight of the flapper inside. I found the third yellow weight to be unneeded, and it's been on my table for months. I put the first weight on the end of the vac and the second on the second section of the hose. It will slide down if you don't check it. Don't point your returns up at the surface while using this! You'll never get good coverage because the current catches the hose like a sail. Point them out a little. There are two more Things get stuck. The guy has already removed hundreds of leaves. Does it get caught occasionally? The easiest fix for me is to put it in front of the return, pull it off, and put it back on the wall. So far, I have gone back to putting immediately. There are 3 more It hurts! It sits there or doesn't climb the walls. I would bet that your pool is your filter/pump and not this vacuum. My pool is a lot like a vacuum with its angles, bumpy surfaces, and other pitfalls. The vac is laughing at the pool. But why? You need a lot of flow. I think that could be a movie title. I have a skimmer and a vacuum on the wall. The second skimmer stays off. I don't use the pipe they gave me. I don't know where it is. The vacuum will not work if myFILTER is not clean, even with a 1hp pump. It sits in the deep end and sucks. No. You don't care about maintaining your pool. If you listen, this vacuum will tell you. The vac goes "rata-tat-tat-tat" multiple times per second on a recently backwashed or clean filter. The vacuum powers through everything. The water flow slows and the vacuum starts to suck as the filter fills up. But not now. I need to backwash my filter every week. The vacuum showed me the light and I was doing it less frequently. Check your filters! It's more likely that the vacuum is causing an issue than it is that. I almost bought a vacuum twice as expensive as the $90 I paid for it, which has already paid for itself in time saved, how awesome the pool looks, and lower maintenance elsewhere. It's been great, I'm glad a review swayed me to give it a try. Remember to be smarter than the machine you're using and find the root of the problem. Great product.
It runs on one AA battery. One year warranty! Help catch leaves and debris before they sink to the bottom of the pool by using the Intex Deluxe Wall Mount Surface Skimmer. The skimmer can be mounted to the Easy Set or metal frame pool walls with an easy to use accessory. The strainer basket is easy to clean because it pulls out. A minimum flow rate of 800 gph is required.
👤If you have a summer waves pool, do not buy this. The intex version won't work. If you have a Intex pool, it would work great. I searched for hours to find a conversion that would work. I bought the Skimbi version that has different attachments for different pools after giving up on this item. I wrote a review to make someone else's life easier. Hope it helps.
👤A coleman pool is 18ft. I will help you with a few things about how to set this up. I have two outlets that come out of the pool and one that goes into the pool. You need to remove the strainer grey piece from the pump. You can screw the blue end of the intex strainer onto the outlet if the strainer piece is removed. When you screw the intex strainer onto the pool frame, you need to put the kit on the vinyl part of the frame, not the frame itself. You need to screw each peg a little at a time. Until it is tight. I need to do a little more fine tuning, but with some help from other's pictures I was able to figure it out. I didn't have to shut one of the inlets off to make sure it was working. I live in west texas and have not bought another filter yet, but I'm sure we will replace ours. Our pool has a lot of bugs which make me very busy cleaning it. We still have a lot of dirt, so I'm looking forward to not having to vacuum as often. I hope the photos help others.
👤The most important person in my pool equipment team. I own a 3000 gallon Intex pool and a sand filter. Despite having good numbers all around, my water was cloudy even though I was vacuuming, filtering, and skimming with my net constantly. There was always a film of dust and sunscreen sludge on the surface. The skim net couldn't keep the gnats in the air. The pool was covered in dust and tiny clippings when I mowed the lawn. I would have to wait for the vacuum to come on. I would cringe when I mowed the lawn. The kids went in with sunscreen on. I cringed when I saw the gnats. I bought the Intex Surface Skimmer. I was not sure. It didn't look like it was effective or reliable. The box was bigger than I anticipated. Installation was very easy. Within half an hour, the surface sludge was gone and my water was sparkling. I'd be foolish not to say that a bit of care and thought goes into using the skimmer effectively. The white restrictor cap on my second outflow port is what I need to generate enough suction to operate the skimmer. The skimmer works best when the blue sleeve floats above the white base cylinder. In calm water, you get your best performance. I left it in while the kids were swimming. If the water gets too turbulent, the sleeve could come out or the bottom out could be worse. An air leak at my restricted outflow port causes air to slowly get sucked in to the line. I have to shut the pump off for a few seconds every couple of hours to allow the air to escape back up the line. It is something to watch out for, but it may not be your experience. I use a name brand paper towel to skim the sludge off the surface of the skimmer. If there is too much sludge in the skimmer, it will float back up out of the skimmer. I cover the end of the hose with a brand name paper towel when I am done using the skimmer. I lifted the skimmer out of the water. The paper towel filters the water as it runs out of the hose and prevents small debris and sludge from flowing out into the pool. I have been fighting to keep my pool clean but I finally got the Intex Surface Skimmer. I can't wipe the smile off my face as I watch it eat bugs and sunscreen sludge.
There is an all-purpose leaf bag. Also, note: The telescopic pole and garden hose are sold separately. The instructions on attaching the leaf bag to the vacuum can be found in the embedded video on this page. It's ideal for pools with 2-speed or variable speed pumps. Powerful vacuuming and turbine blade for wall-climbing. Quick-connect hoses are ideal for assembly. The included items are automatic Weir Valve, 90 Elbow Twist Lock, 7 x 1.2m Twist Lock Hose Lengths, Flow Regulator Valve, Hose Float, and a warranty card.
👤So far, 4 stars. The Polaris ATV went after 6 years. I thought about buying the rebuild kit, but decided to give it a try. Setting up was a snap since I'm familiar with side cleaners. Within a day, my pool was clean. It spins around so it doesn't get stuck. I like that. The Polaris has a problem on the drain. It will climb the walls if you set it high enough. There are two sections of hose that are short. My pool has one skimmer in a corner so it's about 36' to the opposite corner. Two months in, it's working great. If the hoses get tangled, it gets stuck for a while, but it's still 4 stars. I had it stop dead after it got stuck with twigs that were in the gears. It's easy to remove. I had the unit cut the string on my thermometer and wrap it around the drive. It was easy to clear. It's time to replace the moving parts after 3 years. They wear out and cause the unit to stop. The proper parts for a rebuild are: Drive a assembly for $24 on Amazon. Part # RO25100. The drive shaft is about $12 on Amazon. Don't buy a rebuild kit if you want to replace a track. You just have to order the parts separately. There are a lot of videos on YouTube that show how easy it is to replace parts. You can rebuild it with a screwdriver.
👤I live in the Phoenix area. I used the pop ups to clean the pool floor for the past 2 years. I want to clean the pool a little better before the summer starts. I did a lot of research on different types of vacuums. I call it my little tank because it is amazing. The packaging was great and the product was great. The rubber tracks for the wheels are nice. The cleaner is sturdy. The pool floor had a lot of leaves in it. I was embarrassed of the pool overall. The water in the pool is crystal clear and there is no debris in it. The little guy is a tank. The custom hose attachment is pretty cool. Unless you have an Olympic size pool in your backyard, you should not buy extras. I bought the leaf catcher that is advertised along with the cleaner and it works as well. You wont be disappointed if you buy this cleaner now.
👤The item is useless for picking up grass or leaves at the pool. The design flaw renders the unit useless. The complicated vacuum process cannot pick up leaves or grass, and the unit will come to a halt every time it encounters a leaf. The designer of this unit doesn't have one in his pool. No way.
👤When we received this cleaner, we were very pleased with how it worked. I did a great job on my smaller pool and was fun to watch, but it slowed to almost no movement for a week and then stopped working. I took it out and looked at it, but it's jammed up and I've tried a good rinse but it hasn't worked. I tried contacting the seller to see if there was anything we could do to get it working again, because we liked it so much. I haven't received a response for over a week. It looks like we are about to go down the return route, but from what some of the return reviews say, that is going to be an uphill battle.
Run time: The Leaf vac is powered by 8 AA batteries and can run for up to 3 hours. At an unthinkable cost, it delivers unparalleled performance in an above-ground cleaner. There were no messy bags. The oversized debris cartridge holds up to 60% more debris. The Hypergrip Continuous Tracks leave wheels cleaners in its wake. It is difficult to remove contaminants with the Hyperbrush dual scrubbers. SmartNav 2.0 is a robot. Only 14 lbs. The DC motors are energy efficient. One year warranty.
👤I have been suffering for over 5 years with a white that retails for $400 bucks. I've been looking at robotic cleaners. The project came in two steps. Purchase a real robotic pool cleaner and eliminate most of the tree limbs around the pool. The first step was completed this weekend. The pool is completely clear after many limbs were cut. On Monday, I found this robotic vacuum out of the blue and thought I might as well get it because it had several good reviews and a $50 rebate. I had to do some work before the vacuum arrived. The tree limbs are hauled to the streets by the tree cutter so the city waste can pick them up. I had the 2 piles next to the pool clear by 3 hours later. The only defense against leaves and debris used to be the winter net. The net is removed so that the debris can go into the pool, which is where my great white refuses to go because he has a lot of debris in it. It will never happen. We have a pool full of debris and I took pictures of the Great White for an auction. I was excited to open the Dolphin Escape. I wanted to try it. It was ready to leave the box. After untangling the power supply cord, dropped it in the water and hit start, connect the power cable to the power supply. The pool looked like the picture I attached to. It didn't get everything out on the first try. I ran it for a second time and when I woke up, most of the debris was gone. I was very happy. I opened the lid and found the debris canister. It was easy to put it back in the unit after washing it with a hose. I disconnected the power cable, untangled and coiled it onto the unit, and put it upside down as instructed in my storage shed. It could get a nap after all the hard work. I am very pleased with this purchase. I encourage you to also get the 4 year extended warranty that I have. I think this is a huge win and it lasts a long time. I think I'll have to do this at least 2 or 3 times a week in the winter. I might not need the pool net anymore. I noticed when the cleaner switched directions it left the ground and popped a wheelie. They said this is a feature and not a flaw. I can't hold it against them since it still cleans properly every single time. The unit is still working great. I use it once a week and have not had any problems. I want you to buy the extended warranty. It's cheap to get an extended warranty on a pool cleaner. This thing is running like a champ. Fast forward to 2020. The unit works well. The only design flaw with this thing is that it pops stupid wheelies when it changes directions. This isn't a feature. It's not cleaning when it's popping wheelies.
The easiest way to clean a pool. The Dolphin E10 robotic pool vacuum cleaner is the perfect solution for swimming pools up to 30 feet. Get a worry free clean with a 2-year quality assurance. Take your time back. The Dolphin E10 will clean your pool in 1.5 hours. Imagine how much you can do with one less chore. Dolphin does all the hard work for you. The E10 is designed to clean your pool. You can relax knowing that your pool will be clean and free of debris. Every pool cleaning can save energy. The E10 doesn't need any additional equipment to get the job done. The average operating cost for dolphins is 5 cents per hour. Dolphins have been cleaning swimming pools for more than 35 years, providing pool owners with a hassle-free cleaning solution. Spending time with family and friends is what really matters.
👤It was worth every penny. I decided to save my time and energy by fishing out leaves with the net. The little bot is amazing. It is easy to clean. The cord was getting tangled up and the bot thought it was out of wire and turned around. Dollar store pool noodles are a hack. Feed in the cord when you split them down the center. Has not gotten tangled up since.
👤I read a million reviews for a million different types of automatic vacuums and handhelds. Dolphin had better reviews than most. I'm ashamed to admit that I'm using this on a 16' Intex above ground. The pool cost $200. The pump cost $250 after the market. The vacuum cost more than the pool. I don't like covering my pool because it's beneath a tree. It's a pain to fiddle with a cover. I have a skimmer that does an ok job. I don't like to pump constantly. The way I do things requires a vacuum. The Intex automatic vacuum was good for a season but failed this year. The Intex vacuum had a maintenance kit. After just a season, I was done buying cheap solutions. It took less than two minutes for this vacuum to start. It feels well built and has a good weight. In one cycle it cleaned my pool bottom. It went up some of my pool sides. Sometimes it does wheelie around. Pull the cord until you can grab the handle. There is a pushlatch for topside access. It's easy to Hosing the filter down and pieces from the housing for further cleaning access. One time the track came off my unit. Since I put it back, I haven't had a problem. It was a lot more expensive than other solutions. I don't have to bother with covers, manual vacuums, or attachment to pumps or hoses anymore because my pool is now the cleanest it has been. Plug it in, drop it in, and walk away. Don't be if you're reluctant. It is a great unit for an above ground pool. It's worth the money if you can afford it.
👤I bought this for my 33' round. It works well with the fine filter. I bought the Aquabot and returned it. The robot did not impede the cord like the Aquabot did. It works. I have to run it more than once for it to touch the whole pool. It picks up debris. It's easy to remove the filter. This is to Maytronics. The good filter should be included at this price point. If you aren't willing to buy the separate fine filter, you don't need to. The handle is strong. The handle is a big deal for those buying their first robot. I gave it 4 stars because of the need to buy the fine filter separately, otherwise it is a solid investment.
👤The previous owners graciously left their old Dolphin, which worked amazingly when we bought our new house. Despite the negative reviews, I agreed to get a new Dolphin because my husband wanted one. The Dolphin is terrible. Sometimes it misses the largest debris. The picture above is a corner of our pool that the Dolphin misses, even after 4 cleaning cycles! When we replaced the origin filter with the ultra fine filter basket, theFunctionality improved questionably, but not dramatically, my husband insists that there is one. Dolphin didn't let my first negative review get posted, despite my review meeting all required standards, so who knows how many more negative reviews this product would have. I will be looking to upgrade to a different automatic pool cleaner because I still have to manually vacuum our pool even though the Dolphin is running.
There is more run time. The Max is designed to run for an hour. Push-Button operation. . Attaches to a telescopic pool pole. The pool pole is not included. This automatic pool cleaner is 100% cord free, no hose, no cultter cord, and it will clean your pool in around 50 minutes. The upgraded pool vacuum has 2 powerful motors to provide strong suction and 2 bottom brushes to clean the pool with ease. Self-dock smart technology tells pool cleaner robotic stops near the pool wall when the battery is low or completes a working cycle for easy retrieval, which means you can lift it to get it out of the pool and without entering the water. It's convenient for you to use. This robotic pool cleaner has a built-in IPX8 waterproof battery. Plug it into any outlet and you're good to go for the next cleaning. For fully charged, it takes 3-4 hours. Drop it in, let it go and lift it out, it is only 6.6 lbs., it is easy to use. The filter tray is easy to clean, simply remove the cover, rinse the filter, and use a water hose to clean it.
👤The average size inground pool has a pool cleaner. This cleaner is a bit smaller than our other one, but we chose it because it is lightweight and cordless, and it is designed for a smaller space than ours. It takes a little while to get the pool warmed up, the chemicals ready, and operational, after we opened our pool. We use our auto cover a lot more this time of year to repel dirt and debris. The advantage of this little guy is that we can clean the pool with the cover on. This is a huge advantage and the fact that we were unable to do this with our pool cleaner became an issue. My husband likes to leave the pool cleaner running while we are trying to use the pool, which can be a bit awkward. It is early in the season and we haven't run into that yet, but the cordless operation of the cleaner will allow us to operate it and swim with a little more comfort. It only takes a few hours to charge fully, as I was reading most of these require an overnight charge, and it is doing a great job getting our pool spring ready. My underwater camera allowed me to capture this little guy in action, so check out my video for a demonstration. I cannot recommend automatic pool cleaners enough, so I am excited to let this one go this pool season.
👤We love this little guy. The above ground pool is 15'x38" It was difficult to find a sweep that was large enough to run over the bottom without stopping at the folds. It works well. The small bugs that land on the bottom get even the smallest of bites. If there aren't many pine needles and oak leaves. We run it in the morning and afternoon. It is easy to clean. It takes 2 hours to replenish, however it beats pushing the broom and not getting everything. Next best thing would be a solar one. The pool looks great now.
👤I sent it back. It went bad after a good review. The next day, it would just sit and hit the wall. The top was not smooth enough to flip over. I had high expectations. It had a good battery life. Too bad. I wasn't sure if the battery power was going to do it. I'm an engineer. I know about batteries. I dropped in the water after I charged it. I have a pool. After 20 minutes, it started slowing down. I'm not sure if the batteries were lasting as long as they said they were. I opened it and there was a lot of debris. The water flow was restricted by the screen covered by the algae. The screen ran great after I cleaned it. The battery runs for about 50 minutes. That's all my pool needs.
👤We have a pool that is 21" above ground and live in a windy area. The pool gets dirty very quickly. We have tried a lot of vacuums and this is the first one that works well. Charge it up and put it in the pool, then check back in an hour and you'll see that sucker has sucked up all the dirt. We had to make one minor hack. We live on a tropical island and the dust is too small for a filter. Our poolba would fly around the pool with a jet of dust in the back. The filter is easier to clean now that we have stuck cheesecloth on it. The cheese cloth needs to be washed between cleanings but it does a better job with the tiny particles.
Best above ground pool vacuum that are automatic and climbs walls products from Intex. In this article about best above ground pool vacuum that are automatic and climbs walls you can see why people choose the product. Paxcess and Dolphin are also good brands to look for when you are finding best above ground pool vacuum that are automatic and climbs walls.
Intex, Paxcess and Dolphin are some of the best brands that chosen by people for best above ground pool vacuum that are automatic and climbs walls. Find the detail in this article. Dolphin, Xtremepowerus and Zodiac are also brands that their products are worth to check.